To get this branch, use:
bzr branch
http://bzr.ed.am/elec/propeller-clock
« back to all changes in this revision
Viewing changes to src/propeller-clock.ino
- browse files at revision 33
- compare with another revision
- download diff
- download tarball
- view history from revision 33
- Committer: edam
- Date: 2012-01-14 16:54:49 UTC
- Revision ID: edam@waxworlds.org-20120114165449-dkgjun2pb5tr9g2a
updated schematic (switched to PNP) and added info about transistors
- files added:
- src/util/Bounce.cpp
- files removed:
- arduino.mk
- src/modes
- test/fan-test
- test/fan-test/Makefile
- test/led-test
- test/led-test/Makefile
- test/phantom-button-presses
- test/phantom-button-presses/Makefile
- test/rtc-test
- test/rtc-test/Makefile
- test/rtc-test/util
- files renamed:
- src/propeller-clock.cc => src/propeller-clock.ino
- test/fan-test/fan-test.ino => test/fan-test.pde
- files modified:
- .bzrignore
added
removed
src/propeller-clock.ino
1
/* -*- mode: c++; compile-command: "make"; -*- */
2
1
/*
3
2
* propeller-clock.ino
4
3
*
28
27
29
28
* a PC fan is wired up to a 12V power supply
30
29
31
* the fan's SENSE (tachometer) pin connected to pin 2 on the
32
Arduino.
30
* the fan's SENSE (tachiometer) pin connected to pin 2 on the
31
arduino.
33
32
34
* the pins 4 to 13 on the Arduino should directly drive an LED (the
33
* the pins 4 to 13 on the arduino should directly drive an LED (the
35
34
LED on pin 4 is in the centre of the clock face and the LED on pin
36
35
13 is at the outside.
37
36
38
37
* if a longer hand (and a larger clock face) is desired, pin 4 can be
39
used to indirectly drive a transistor which in turn drives several
40
LEDs that turn on and off in unison in the centre of the clock.
38
used to indirectly drive (via a MOSFET) multiple LEDs which turn on
39
and off in unison in the centre of the clock.
41
40
42
41
* a button should be attached to pin 3 that grounds it when pressed.
43
42
44
* A DS1307 remote clock is connected via I2C on analogue pins 4 and 5.
45
46
43
Implementation details:
47
44
48
* for a schematic, see ../project/propeller-clock.sch.
45
* for a schematic, see project/propeller-clock.sch.
49
46
50
47
* the timing of the drawing of the clock face is recalculated with
51
48
every rotation of the propeller.
52
49
53
* a PC fan actually sends 2 tachometer pulses per revolution, so the
50
* a PC fan actually sends 2 tachiometer pulses per revolution, so the
54
51
software skips every other one. This means that the clock may
55
52
appear upside-down if started with the propeller in the wrong
56
position. You will need to experiment to discover the position that
53
position. You will need to experiment to dicsover the position that
57
54
the propeller must be in when starting the clock.
58
55
59
56
Usage instructions:
70
67
- pressing the button increments the field currently being set
71
68
- pressing and holding the button for a second cycles through the
72
69
fields that can be set
73
- pressing and holding the button for 5 seconds sets the time and
74
exits "time set" mode
70
- press and holding the button for 5 seconds to finish
75
71
76
72
******************************************************************************/
77
73
78
#include "config.h"
79
#include "button.h"
80
#include "time.h"
81
#include "Arduino.h"
82
#include "modes/switcher_major_mode.h"
83
#include "modes/settings_major_mode.h"
84
#include "modes/analogue_clock_mode.h"
85
#include "modes/digital_clock_mode.h"
86
#include "modes/info_mode.h"
87
#include "modes/test_pattern_mode.h"
88
#include "text.h"
89
#include "text_renderer.h"
90
#include "common.h"
74
75
#include <Bounce.h>
91
76
92
77
//_____________________________________________________________________________
93
78
// data
94
79
80
95
81
// when non-zero, the time (in microseconds) of a new fan pulse that
96
82
// has just occurred, which means that segment drawing needs to be
97
83
// restarted
98
static unsigned long _new_pulse_at = 0;
84
static unsigned long new_pulse_at = 0;
99
85
100
86
// the time (in microseconds) when the last fan pulse occurred
101
static unsigned long _last_pulse_at = 0;
87
static unsigned long last_pulse_at = 0;
102
88
103
89
// duration (in microseconds) that a segment should be displayed
104
static unsigned long _segment_step = 0;
90
static unsigned long segment_step = 0;
105
91
106
92
// remainder after divisor and a tally of the remainders for each segment
107
static unsigned long _segment_step_sub_step = 0;
108
static unsigned long _segment_step_sub = 0;
109
110
// the button
111
static Button _button( 3 );
112
113
// major modes
114
static MajorMode *_modes[ 3 ];
115
116
// current major mode
117
static int _mode = 0;
93
static unsigned long segment_step_sub_step = 0;
94
static unsigned long segment_step_sub = 0;
95
96
// flag to indicate that the drawing mode should be cycled to the next one
97
static bool inc_draw_mode = false;
98
99
// a bounce-managed button
100
static Bounce button( 3, 5 );
101
102
// the time
103
static int time_hours = 0;
104
static int time_minutes = 0;
105
static int time_seconds = 0;
106
107
// number of segments in a full display (rotation) is 60 (one per
108
// second) times the desired number of sub-divisions of a second
109
#define NUM_SECOND_SEGMENTS 5
110
#define NUM_SEGMENTS ( 60 * NUM_SECOND_SEGMENTS )
118
111
119
112
//_____________________________________________________________________________
120
113
// code
121
114
122
// perform button events
123
void do_button_events()
124
{
125
// loop through pending events
126
while( int event = _button.get_event() )
127
{
128
switch( event )
129
{
130
case 1:
131
// short press
132
_modes[ _mode ]->press();
133
break;
134
case 2:
135
// long press
136
_modes[ _mode ]->long_press();
137
break;
138
case 3:
139
// looooong press (change major mode)
140
_modes[ _mode ]->deactivate();
141
if( !_modes[ ++_mode ] ) _mode = 0;
142
_modes[ _mode ]->activate();
143
break;
115
116
// check for button presses
117
void checkButtons()
118
{
119
// update buttons
120
button.update();
121
122
// notice button presses
123
if( button.risingEdge() )
124
inc_draw_mode = true;
125
}
126
127
128
// keep track of time
129
void trackTime()
130
{
131
// previous time and any carried-over milliseconds
132
static unsigned long last_time = millis();
133
static unsigned long carry = 0;
134
135
// how many milliseonds have elapsed since we last checked?
136
unsigned long next_time = millis();
137
unsigned long delta = next_time - last_time + carry;
138
139
// update the previous time and carried-over milliseconds
140
last_time = next_time;
141
carry = delta % 1000;
142
143
// add the seconds that have passed to the time
144
time_seconds += delta / 1000;
145
while( time_seconds >= 60 ) {
146
time_seconds -= 60;
147
time_minutes++;
148
if( time_minutes >= 60 ) {
149
time_minutes -= 60;
150
time_hours++;
151
if( time_hours >= 24 )
152
time_hours -= 24;
144
153
}
145
154
}
146
155
}
147
156
148
157
158
// draw a segment for the test display
159
void drawNextSegment_test( bool reset )
160
{
161
// keep track of segment
162
static unsigned int segment = 0;
163
if( reset ) segment = 0;
164
segment++;
165
166
// turn on inside and outside LEDs
167
digitalWrite( 4, HIGH );
168
digitalWrite( 13, HIGH );
169
170
// display segment number in binary across in the inside LEDs,
171
// with the LED on pin 12 showing the least-significant bit
172
for( int a = 0; a < 8; a++ )
173
digitalWrite( 12 - a, ( ( segment >> a ) & 1 )? HIGH : LOW );
174
}
175
176
177
// draw a segment for the time display
178
void drawNextSegment_time( bool reset )
179
{
180
static unsigned int second = 0;
181
static unsigned int segment = 0;
182
183
// handle display reset
184
if( reset ) {
185
second = 0;
186
segment = 0;
187
}
188
189
// what needs to be drawn?
190
bool draw_tick = !segment && second % 5 == 0;
191
bool draw_second = !segment && second == time_seconds;
192
bool draw_minute = !segment && second == time_minutes;
193
bool draw_hour = !segment && second == time_hours;
194
195
// set the LEDs
196
digitalWrite( 13, HIGH );
197
digitalWrite( 12, draw_tick || draw_minute );
198
for( int a = 10; a <= 11; a++ )
199
digitalWrite( a, draw_minute || draw_second );
200
for( int a = 4; a <= 9; a++ )
201
digitalWrite( 10, draw_minute | draw_second || draw_hour );
202
203
// inc position
204
if( ++segment >= NUM_SECOND_SEGMENTS ) {
205
segment = 0;
206
second++;
207
}
208
}
209
210
149
211
// draw a display segment
150
void draw_next_segment( bool reset )
212
void drawNextSegment( bool reset )
151
213
{
152
// keep track of segment
153
#if CLOCK_FORWARD
154
static int segment = ( NUM_SEGMENTS - CLOCK_SHIFT ) % NUM_SEGMENTS;
155
if( reset ) segment = ( NUM_SEGMENTS - CLOCK_SHIFT ) % NUM_SEGMENTS;
156
#else
157
static int segment = NUM_SEGMENTS - 1 - CLOCK_SHIFT;
158
if( reset ) segment = NUM_SEGMENTS - 1 - CLOCK_SHIFT;
159
#endif
160
161
// reset the text renderer's buffer
162
TextRenderer::reset_buffer();
163
164
if( reset )
165
{
166
_modes[ _mode ]->draw_reset();
167
168
// tell the text services we're starting a new frame
169
Text::draw_reset();
170
}
171
172
// draw
173
_modes[ _mode ]->draw( segment );
174
175
// TODO: remove this hack
176
Text::post_draw();
177
178
// draw text rednerer's buffer
179
TextRenderer::output_buffer();
180
181
#if CLOCK_FORWARD
182
if( ++segment >= NUM_SEGMENTS ) segment = 0;
183
#else
184
if( --segment < 0 ) segment = NUM_SEGMENTS - 1;
185
#endif
214
static int draw_mode = 0;
215
216
// handle mode switch requests
217
if( reset && inc_draw_mode ) {
218
inc_draw_mode = false;
219
draw_mode++;
220
if( draw_mode >= 2 )
221
draw_mode = 0;
222
}
223
224
// draw the segment
225
switch( draw_mode ) {
226
case 0: drawNextSegment_test( reset ); break;
227
case 1: drawNextSegment_time( reset ); break;
228
}
186
229
}
187
230
188
231
189
232
// calculate time constants when a new pulse has occurred
190
void calculate_segment_times()
233
void calculateSegmentTimes()
191
234
{
192
235
// check for overflows, and only recalculate times if there isn't
193
236
// one (if there is, we'll just go with the last pulse's times)
194
if( _new_pulse_at > _last_pulse_at )
237
if( new_pulse_at > last_pulse_at )
195
238
{
196
239
// new segment stepping times
197
unsigned long delta = _new_pulse_at - _last_pulse_at;
198
_segment_step = delta / NUM_SEGMENTS;
199
_segment_step_sub = 0;
200
_segment_step_sub_step = delta % NUM_SEGMENTS;
240
unsigned long delta = new_pulse_at - last_pulse_at;
241
segment_step = delta / NUM_SEGMENTS;
242
segment_step_sub = 0;
243
segment_step_sub_step = delta % NUM_SEGMENTS;
201
244
}
202
245
203
246
// now we have dealt with this pulse, save the pulse time and
204
247
// clear new_pulse_at, ready for the next pulse
205
_last_pulse_at = _new_pulse_at;
206
_new_pulse_at = 0;
248
last_pulse_at = new_pulse_at;
249
new_pulse_at = 0;
207
250
}
208
251
209
252
210
253
// wait until it is time to draw the next segment or a new pulse has
211
254
// occurred
212
void wait_till_end_of_segment( bool reset )
255
void waitTillNextSegment( bool reset )
213
256
{
214
257
static unsigned long end_time = 0;
215
258
216
259
// handle reset
217
260
if( reset )
218
end_time = _last_pulse_at;
261
end_time = last_pulse_at;
219
262
220
263
// work out the time that this segment should be displayed until
221
end_time += _segment_step;
222
_segment_step_sub += _segment_step_sub_step;
223
if( _segment_step_sub >= NUM_SEGMENTS ) {
224
_segment_step_sub -= NUM_SEGMENTS;
264
end_time += segment_step;
265
segment_step_sub += segment_step_sub_step;
266
if( segment_step_sub >= NUM_SEGMENTS ) {
267
segment_step_sub -= NUM_SEGMENTS;
225
268
end_time++;
226
269
}
227
270
228
271
// wait
229
while( micros() < end_time && !_new_pulse_at );
272
while( micros() < end_time && !new_pulse_at );
230
273
}
231
274
232
275
233
// ISR to handle the pulses from the fan's tachometer
234
void fan_pulse_handler()
276
// ISR to handle the pulses from the fan's tachiometer
277
void fanPulseHandler()
235
278
{
236
279
// the fan actually sends two pulses per revolution. These pulses
237
280
// may not be exactly evenly distributed around the rotation, so
242
285
if( !ignore )
243
286
{
244
287
// set a new pulse time
245
_new_pulse_at = micros();
288
new_pulse_at = micros();
246
289
}
247
290
}
248
291
250
293
// main setup
251
294
void setup()
252
295
{
253
// set up an interrupt handler on pin 2 to notice fan pulses
254
attachInterrupt( 0, fan_pulse_handler, RISING );
296
// set up an interrupt handler on pin 2 to nitice fan pulses
297
attachInterrupt( 0, fanPulseHandler, RISING );
255
298
digitalWrite( 2, HIGH );
256
299
257
300
// set up output pins (4 to 13) for the led array
260
303
261
304
// set up mode-switch button on pin 3
262
305
pinMode( 3, INPUT );
263
digitalWrite( 3, HIGH );
264
static int event_times[] = { 5, 500, 4000, 0 };
265
_button.set_event_times( event_times );
266
267
// initialise RTC
268
Time::init();
269
270
// init text renderer
271
TextRenderer::init();
272
273
// reset text
274
Text::reset();
275
leds_off();
276
277
static SwitcherMajorMode switcher;
278
static SettingsMajorMode settings;
279
280
// add major modes
281
int mode = 0;
282
_modes[ mode++ ] = &switcher;
283
_modes[ mode++ ] = &settings;
284
_modes[ mode ] = 0;
285
286
// activate the current major mode
287
_modes[ _mode ]->activate();
306
307
// serial comms
308
Serial.begin( 9600 );
288
309
}
289
310
290
311
292
313
void loop()
293
314
{
294
315
// if there has been a new pulse, we'll be resetting the display
295
bool reset = _new_pulse_at? true : false;
296
297
// update button
298
_button.update();
316
bool reset = new_pulse_at? true : false;
299
317
300
318
// only do this stuff at the start of a display cycle, to ensure
301
319
// that no state changes mid-display
302
320
if( reset )
303
321
{
304
// calculate segment times
305
calculate_segment_times();
322
// check buttons
323
checkButtons();
306
324
307
325
// keep track of time
308
Time::update();
309
310
// perform button events
311
do_button_events();
326
trackTime();
312
327
}
313
328
314
329
// draw this segment
315
draw_next_segment( reset );
330
drawNextSegment( reset );
331
332
// do we need to recalculate segment times?
333
if( reset )
334
calculateSegmentTimes();
316
335
317
336
// wait till it's time to draw the next segment
318
wait_till_end_of_segment( reset );
337
waitTillNextSegment( reset );
319
338
}
Loggerhead is a web-based interface for Breezy
Version: 2.0.2.dev0