To get this branch, use:
bzr branch
http://bzr.ed.am/elec/propeller-clock
« back to all changes in this revision
Viewing changes to src/propeller-clock.ino
- browse files at revision 50
- compare with another revision
- download diff
- download tarball
- view history from revision 50
- Committer: Dan
- Date: 2012-02-17 01:24:40 UTC
- Revision ID: dan@waxworlds.org-20120217012440-y0kwpr4l2i3y1zuw
updated arduino.mk
- files added:
- src/util/Bounce.cpp
- files removed:
- src/analogue_clock.cc
- test/rtc-test
- test/rtc-test/util
- files renamed:
- src/propeller-clock.cc => src/propeller-clock.ino
- files modified:
- .bzrignore
- src/Makefile
added
removed
src/propeller-clock.ino
28
28
29
29
* a PC fan is wired up to a 12V power supply
30
30
31
* the fan's SENSE (tachometer) pin connected to pin 2 on the
32
Arduino.
31
* the fan's SENSE (tachiometer) pin connected to pin 2 on the
32
arduino.
33
33
34
* the pins 4 to 13 on the Arduino should directly drive an LED (the
34
* the pins 4 to 13 on the arduino should directly drive an LED (the
35
35
LED on pin 4 is in the centre of the clock face and the LED on pin
36
36
13 is at the outside.
37
37
38
38
* if a longer hand (and a larger clock face) is desired, pin 4 can be
39
39
used to indirectly drive a transistor which in turn drives several
40
LEDs that turn on and off in unison in the centre of the clock.
40
LEDs that turn on anf off in unison in the centre of the clock.
41
41
42
42
* a button should be attached to pin 3 that grounds it when pressed.
43
43
44
* A DS1307 remote clock is connected via I2C on analogue pins 4 and 5.
44
* A DS1307 remote clock is connected via I2C on analog pins 4 and 5.
45
45
46
46
Implementation details:
47
47
50
50
* the timing of the drawing of the clock face is recalculated with
51
51
every rotation of the propeller.
52
52
53
* a PC fan actually sends 2 tachometer pulses per revolution, so the
53
* a PC fan actually sends 2 tachiometer pulses per revolution, so the
54
54
software skips every other one. This means that the clock may
55
55
appear upside-down if started with the propeller in the wrong
56
position. You will need to experiment to discover the position that
56
position. You will need to experiment to dicsover the position that
57
57
the propeller must be in when starting the clock.
58
58
59
59
Usage instructions:
75
75
76
76
******************************************************************************/
77
77
78
#include "config.h"
79
#include "button.h"
80
#include "time.h"
81
#include "Arduino.h"
82
#include "analogue_clock.h"
83
#include "digital_clock.h"
84
#include "test_pattern.h"
78
79
#include <Bounce.h>
80
#include <DS1307.h>
81
#include <Wire.h>
85
82
86
83
//_____________________________________________________________________________
87
84
// data
88
85
86
89
87
// when non-zero, the time (in microseconds) of a new fan pulse that
90
88
// has just occurred, which means that segment drawing needs to be
91
89
// restarted
92
static unsigned long _new_pulse_at = 0;
90
static unsigned long new_pulse_at = 0;
93
91
94
92
// the time (in microseconds) when the last fan pulse occurred
95
static unsigned long _last_pulse_at = 0;
93
static unsigned long last_pulse_at = 0;
96
94
97
95
// duration (in microseconds) that a segment should be displayed
98
static unsigned long _segment_step = 0;
96
static unsigned long segment_step = 0;
99
97
100
98
// remainder after divisor and a tally of the remainders for each segment
101
static unsigned long _segment_step_sub_step = 0;
102
static unsigned long _segment_step_sub = 0;
103
104
// the button
105
static Button _button( 3 );
106
107
// modes
108
static int _major_mode = 0;
109
static int _minor_mode = 0;
110
111
#define MAIN_MODE_IDX 0
112
113
#define ANALOGUE_CLOCK_IDX 0
114
#define DIGITAL_CLOCK_IDX 1
115
#define TEST_PATTERN_IDX 2
99
static unsigned long segment_step_sub_step = 0;
100
static unsigned long segment_step_sub = 0;
101
102
// flag to indicate that the drawing mode should be cycled to the next one
103
static bool inc_draw_mode = false;
104
105
// a bounce-managed button
106
static Bounce button( 3, 50 );
107
108
// the time
109
static int time_hours = 0;
110
static int time_minutes = 0;
111
static int time_seconds = 0;
112
113
// number of segments in a full display (rotation) is 60 (one per
114
// second) times the desired number of sub-divisions of a second
115
#define NUM_SECOND_SEGMENTS 5
116
#define NUM_SEGMENTS ( 60 * NUM_SECOND_SEGMENTS )
116
117
117
118
//_____________________________________________________________________________
118
119
// code
119
120
120
121
121
// activate the current minor mode
122
void activate_minor_mode()
122
// check for button presses
123
void checkButtons()
123
124
{
124
switch( _minor_mode ) {
125
case ANALOGUE_CLOCK_IDX: analogue_clock_activate(); break;
126
case DIGITAL_CLOCK_IDX: digital_clock_activate(); break;
127
}
125
// update buttons
126
button.update();
127
128
// notice button presses
129
if( button.risingEdge() )
130
inc_draw_mode = true;
128
131
}
129
132
130
// perform button events
131
void do_button_events()
133
134
// keep track of time
135
void trackTime()
132
136
{
133
// loop through pending events
134
while( int event = _button.get_event() )
135
{
136
switch( event )
137
{
138
case 1:
139
// short press
140
switch( _major_mode ) {
141
case MAIN_MODE_IDX:
142
switch( _minor_mode ) {
143
case ANALOGUE_CLOCK_IDX: analogue_clock_press(); break;
144
case DIGITAL_CLOCK_IDX: digital_clock_press(); break;
145
}
146
break;
147
}
148
break;
149
150
case 2:
151
// long press
152
switch( _major_mode ) {
153
case MAIN_MODE_IDX:
154
if( ++_minor_mode >= 3 )
155
_minor_mode = 0;
156
switch( _minor_mode ) {
157
case DIGITAL_CLOCK_IDX: digital_clock_activate(); break;
158
}
159
break;
160
}
161
break;
162
163
case 3:
164
// looooong press (change major mode)
165
if( ++_major_mode > 0 )
166
_major_mode = 0;
167
switch( _major_mode ) {
168
case MAIN_MODE_IDX: _minor_mode = 0; break;
169
}
170
activate_minor_mode();
171
break;
137
// previous time and any carried-over milliseconds
138
static unsigned long last_time = millis();
139
static unsigned long carry = 0;
140
141
// how many milliseonds have elapsed since we last checked?
142
unsigned long next_time = millis();
143
unsigned long delta = next_time - last_time + carry;
144
145
// update the previous time and carried-over milliseconds
146
last_time = next_time;
147
carry = delta % 1000;
148
149
// add the seconds that have passed to the time
150
time_seconds += delta / 1000;
151
while( time_seconds >= 60 ) {
152
time_seconds -= 60;
153
time_minutes++;
154
if( time_minutes >= 60 ) {
155
time_minutes -= 60;
156
time_hours++;
157
if( time_hours >= 24 )
158
time_hours -= 24;
172
159
}
173
160
}
174
161
}
175
162
176
163
177
// draw a display segment
178
void draw_next_segment( bool reset )
164
// turn an led on/off
165
void ledOn( int num, bool on )
166
{
167
if( num < 0 || num > 9 ) return;
168
169
// convert to pin no.
170
num += 4;
171
172
// pin 4 needs to be inverted (it's driving a PNP)
173
// NOTE: PIN 4 TEMPORARILY DISABLED
174
if( num == 4 ) on = true; //!on
175
176
digitalWrite( num, on? HIGH : LOW );
177
}
178
179
180
// draw a segment for the test display
181
void drawNextSegment_test( bool reset )
179
182
{
180
183
// keep track of segment
181
#if CLOCK_FORWARD
182
static int segment = ( NUM_SEGMENTS - CLOCK_SHIFT ) % NUM_SEGMENTS;
183
if( reset ) segment = ( NUM_SEGMENTS - CLOCK_SHIFT ) % NUM_SEGMENTS;
184
#else
185
static int segment = NUM_SEGMENTS - 1 - CLOCK_SHIFT;
186
if( reset ) segment = NUM_SEGMENTS - 1 - CLOCK_SHIFT;
187
#endif
188
189
// frame reset
184
static unsigned int segment = 0;
185
if( reset ) segment = 0;
186
segment++;
187
188
// turn on inside and outside LEDs
189
ledOn( 0, true );
190
ledOn( 9, true );
191
192
// display segment number in binary across in the inside LEDs,
193
// with the LED on pin 12 showing the least-significant bit
194
for( int a = 0; a < 8; a++ )
195
ledOn( 8 - a, ( segment >> a ) & 1 );
196
}
197
198
199
// draw a segment for the time display
200
void drawNextSegment_time( bool reset )
201
{
202
static int second = 0;
203
static int segment = 0;
204
205
// handle display reset
190
206
if( reset ) {
191
switch( _major_mode ) {
192
case MAIN_MODE_IDX:
193
switch( _minor_mode ) {
194
case ANALOGUE_CLOCK_IDX: analogue_clock_draw_reset(); break;
195
case DIGITAL_CLOCK_IDX: digital_clock_draw_reset(); break;
196
}
197
break;
198
}
199
}
200
201
// draw
202
switch( _major_mode ) {
203
case MAIN_MODE_IDX:
204
switch( _minor_mode ) {
205
case ANALOGUE_CLOCK_IDX: analogue_clock_draw( segment ); break;
206
case DIGITAL_CLOCK_IDX: digital_clock_draw( segment ); break;
207
case TEST_PATTERN_IDX: test_pattern_draw( segment ); break;
208
}
209
break;
210
}
211
212
#if CLOCK_FORWARD
213
if( ++segment >= NUM_SEGMENTS ) segment = 0;
214
#else
215
if( --segment < 0 ) segment = NUM_SEGMENTS - 1;
216
#endif
207
second = 0;
208
segment = 0;
209
}
210
211
// what needs to be drawn?
212
bool draw_tick = !segment && second % 5 == 0;
213
bool draw_second = !segment && second == time_seconds;
214
bool draw_minute = !segment && second == time_minutes;
215
bool draw_hour = !segment && second == time_hours;
216
217
// set the LEDs
218
ledOn( 9, true );
219
ledOn( 8, draw_tick || draw_minute );
220
for( int a = 6; a <= 7; a++ )
221
ledOn( a, draw_minute || draw_second );
222
for( int a = 0; a <= 5; a++ )
223
ledOn( a, draw_minute || draw_second || draw_hour );
224
225
// inc position
226
if( ++segment >= NUM_SECOND_SEGMENTS ) {
227
segment = 0;
228
second++;
229
}
230
}
231
232
233
// draw a display segment
234
void drawNextSegment( bool reset )
235
{
236
static int draw_mode = 0;
237
238
// handle mode switch requests
239
if( reset && inc_draw_mode ) {
240
inc_draw_mode = false;
241
draw_mode++;
242
if( draw_mode >= 2 )
243
draw_mode = 0;
244
}
245
246
// draw the segment
247
switch( draw_mode ) {
248
case 0: drawNextSegment_test( reset ); break;
249
case 1: drawNextSegment_time( reset ); break;
250
}
217
251
}
218
252
219
253
220
254
// calculate time constants when a new pulse has occurred
221
void calculate_segment_times()
255
void calculateSegmentTimes()
222
256
{
223
257
// check for overflows, and only recalculate times if there isn't
224
258
// one (if there is, we'll just go with the last pulse's times)
225
if( _new_pulse_at > _last_pulse_at )
259
if( new_pulse_at > last_pulse_at )
226
260
{
227
261
// new segment stepping times
228
unsigned long delta = _new_pulse_at - _last_pulse_at;
229
_segment_step = delta / NUM_SEGMENTS;
230
_segment_step_sub = 0;
231
_segment_step_sub_step = delta % NUM_SEGMENTS;
262
unsigned long delta = new_pulse_at - last_pulse_at;
263
segment_step = delta / NUM_SEGMENTS;
264
segment_step_sub = 0;
265
segment_step_sub_step = delta % NUM_SEGMENTS;
232
266
}
233
267
234
268
// now we have dealt with this pulse, save the pulse time and
235
269
// clear new_pulse_at, ready for the next pulse
236
_last_pulse_at = _new_pulse_at;
237
_new_pulse_at = 0;
270
last_pulse_at = new_pulse_at;
271
new_pulse_at = 0;
238
272
}
239
273
240
274
241
275
// wait until it is time to draw the next segment or a new pulse has
242
276
// occurred
243
void wait_till_end_of_segment( bool reset )
277
void waitTillNextSegment( bool reset )
244
278
{
245
279
static unsigned long end_time = 0;
246
280
247
281
// handle reset
248
282
if( reset )
249
end_time = _last_pulse_at;
283
end_time = last_pulse_at;
250
284
251
285
// work out the time that this segment should be displayed until
252
end_time += _segment_step;
253
_segment_step_sub += _segment_step_sub_step;
254
if( _segment_step_sub >= NUM_SEGMENTS ) {
255
_segment_step_sub -= NUM_SEGMENTS;
286
end_time += segment_step;
287
segment_step_sub += segment_step_sub_step;
288
if( segment_step_sub >= NUM_SEGMENTS ) {
289
segment_step_sub -= NUM_SEGMENTS;
256
290
end_time++;
257
291
}
258
292
259
293
// wait
260
while( micros() < end_time && !_new_pulse_at );
294
while( micros() < end_time && !new_pulse_at );
261
295
}
262
296
263
297
264
298
// ISR to handle the pulses from the fan's tachiometer
265
void fan_pulse_handler()
299
void fanPulseHandler()
266
300
{
267
301
// the fan actually sends two pulses per revolution. These pulses
268
302
// may not be exactly evenly distributed around the rotation, so
273
307
if( !ignore )
274
308
{
275
309
// set a new pulse time
276
_new_pulse_at = micros();
310
new_pulse_at = micros();
277
311
}
278
312
}
279
313
282
316
void setup()
283
317
{
284
318
// set up an interrupt handler on pin 2 to nitice fan pulses
285
attachInterrupt( 0, fan_pulse_handler, RISING );
319
attachInterrupt( 0, fanPulseHandler, RISING );
286
320
digitalWrite( 2, HIGH );
287
321
288
322
// set up output pins (4 to 13) for the led array
292
326
// set up mode-switch button on pin 3
293
327
pinMode( 3, INPUT );
294
328
digitalWrite( 3, HIGH );
295
static int event_times[] = { 5, 500, 4000, 0 };
296
_button.set_event_times( event_times );
297
298
// initialise RTC
299
Time::init();
300
301
// activate the minor mode
302
switch( _major_mode ) {
303
case MAIN_MODE_IDX: activate_minor_mode(); break;
304
}
329
330
// get the time from the real-time clock
331
int rtc_data[ 7 ];
332
RTC.get( rtc_data, true );
333
time_hours = rtc_data[ DS1307_HR ];
334
time_minutes = rtc_data[ DS1307_MIN ];
335
time_seconds = rtc_data[ DS1307_SEC ];
336
337
// serial comms
338
Serial.begin( 9600 );
305
339
}
306
340
307
341
309
343
void loop()
310
344
{
311
345
// if there has been a new pulse, we'll be resetting the display
312
bool reset = _new_pulse_at? true : false;
313
314
// update button
315
_button.update();
346
bool reset = new_pulse_at? true : false;
316
347
317
348
// only do this stuff at the start of a display cycle, to ensure
318
349
// that no state changes mid-display
319
350
if( reset )
320
351
{
321
// calculate segment times
322
calculate_segment_times();
352
// check buttons
353
checkButtons();
323
354
324
355
// keep track of time
325
Time::update();
326
327
// perform button events
328
do_button_events();
356
trackTime();
329
357
}
330
358
331
359
// draw this segment
332
draw_next_segment( reset );
360
drawNextSegment( reset );
361
362
// do we need to recalculate segment times?
363
if( reset )
364
calculateSegmentTimes();
333
365
334
366
// wait till it's time to draw the next segment
335
wait_till_end_of_segment( reset );
367
waitTillNextSegment( reset );
336
368
}
Loggerhead is a web-based interface for Breezy
Version: 2.0.2.dev0