To get this branch, use:
bzr branch
http://bzr.ed.am/elec/propeller-clock
« back to all changes in this revision
Viewing changes to src/propeller-clock.ino
- browse files at revision 53
- compare with another revision
- download diff
- download tarball
- view history from revision 53
- Committer: edam
- Date: 2012-02-23 00:26:32 UTC
- Revision ID: edam@waxworlds.org-20120223002632-kkwrdwijfmv45f0j
conrtol segment number from one place and reverse the order the segments are drawn (backwards clock!)
- files added:
- src/util/Bounce.cpp
- files removed:
- src/analogue_clock.cc
- test/rtc-test
- test/rtc-test/util
- files renamed:
- src/propeller-clock.cc => src/propeller-clock.ino
- files modified:
- .bzrignore
- src/Makefile
added
removed
src/propeller-clock.ino
28
28
29
29
* a PC fan is wired up to a 12V power supply
30
30
31
* the fan's SENSE (tachometer) pin connected to pin 2 on the
32
Arduino.
31
* the fan's SENSE (tachiometer) pin connected to pin 2 on the
32
arduino.
33
33
34
* the pins 4 to 13 on the Arduino should directly drive an LED (the
34
* the pins 4 to 13 on the arduino should directly drive an LED (the
35
35
LED on pin 4 is in the centre of the clock face and the LED on pin
36
36
13 is at the outside.
37
37
38
38
* if a longer hand (and a larger clock face) is desired, pin 4 can be
39
39
used to indirectly drive a transistor which in turn drives several
40
LEDs that turn on and off in unison in the centre of the clock.
40
LEDs that turn on anf off in unison in the centre of the clock.
41
41
42
42
* a button should be attached to pin 3 that grounds it when pressed.
43
43
44
* A DS1307 remote clock is connected via I2C on analogue pins 4 and 5.
44
* A DS1307 remote clock is connected via I2C on analog pins 4 and 5.
45
45
46
46
Implementation details:
47
47
50
50
* the timing of the drawing of the clock face is recalculated with
51
51
every rotation of the propeller.
52
52
53
* a PC fan actually sends 2 tachometer pulses per revolution, so the
53
* a PC fan actually sends 2 tachiometer pulses per revolution, so the
54
54
software skips every other one. This means that the clock may
55
55
appear upside-down if started with the propeller in the wrong
56
position. You will need to experiment to discover the position that
56
position. You will need to experiment to dicsover the position that
57
57
the propeller must be in when starting the clock.
58
58
59
59
Usage instructions:
75
75
76
76
******************************************************************************/
77
77
78
#include "config.h"
79
#include "button.h"
80
#include "time.h"
81
#include "Arduino.h"
82
#include "analogue_clock.h"
83
#include "digital_clock.h"
84
#include "test_pattern.h"
85
#include "settings_mode.h"
86
#include "text.h"
87
#include "text_renderer.h"
88
#include "common.h"
78
79
#include <Bounce.h>
80
#include <DS1307.h>
81
#include <Wire.h>
89
82
90
83
//_____________________________________________________________________________
91
84
// data
92
85
86
93
87
// when non-zero, the time (in microseconds) of a new fan pulse that
94
88
// has just occurred, which means that segment drawing needs to be
95
89
// restarted
96
static unsigned long _new_pulse_at = 0;
90
static unsigned long new_pulse_at = 0;
97
91
98
92
// the time (in microseconds) when the last fan pulse occurred
99
static unsigned long _last_pulse_at = 0;
93
static unsigned long last_pulse_at = 0;
100
94
101
95
// duration (in microseconds) that a segment should be displayed
102
static unsigned long _segment_step = 0;
96
static unsigned long segment_step = 0;
103
97
104
98
// remainder after divisor and a tally of the remainders for each segment
105
static unsigned long _segment_step_sub_step = 0;
106
static unsigned long _segment_step_sub = 0;
107
108
// the button
109
static Button _button( 3 );
110
111
// modes
112
static int _major_mode = 0;
113
static int _minor_mode = 0;
114
115
#define MAIN_MODE_IDX 1
116
#define SETTINGS_MODE_IDX 0
117
118
#define ANALOGUE_CLOCK_IDX 0
119
#define DIGITAL_CLOCK_IDX 1
120
#define TEST_PATTERN_IDX 2
99
static unsigned long segment_step_sub_step = 0;
100
static unsigned long segment_step_sub = 0;
101
102
// flag to indicate that the drawing mode should be cycled to the next one
103
static bool inc_draw_mode = false;
104
105
// a bounce-managed button
106
static Bounce button( 3, 50 );
107
108
// the time
109
static int time_hours = 0;
110
static int time_minutes = 0;
111
static int time_seconds = 0;
112
113
// number of segments in a full display (rotation) is 60 (one per
114
// second) times the desired number of sub-divisions of a second
115
#define NUM_SECOND_SEGMENTS 5
116
#define NUM_SEGMENTS ( 60 * NUM_SECOND_SEGMENTS )
117
118
// clock direction
119
#define CLOCK_FORWARD 0
121
120
122
121
//_____________________________________________________________________________
123
122
// code
124
123
125
124
126
// activate the current minor mode
127
void activate_minor_mode()
128
{
129
switch( _minor_mode ) {
130
case ANALOGUE_CLOCK_IDX: analogue_clock_activate(); break;
131
case DIGITAL_CLOCK_IDX: digital_clock_activate(); break;
132
}
133
134
// reset text
135
Text::reset();
136
leds_off();
137
}
138
139
140
// activate major mode
141
void activate_major_mode()
142
{
143
switch( _major_mode ) {
144
case MAIN_MODE_IDX: activate_minor_mode(); break;
145
case SETTINGS_MODE_IDX: settings_mode_activate(); break;
146
}
147
148
// reset text
149
Text::reset();
150
leds_off();
151
}
152
153
154
// perform button events
155
void do_button_events()
156
{
157
// loop through pending events
158
while( int event = _button.get_event() )
159
{
160
switch( event )
161
{
162
case 1:
163
// short press
164
switch( _major_mode ) {
165
case MAIN_MODE_IDX:
166
switch( _minor_mode ) {
167
case ANALOGUE_CLOCK_IDX: analogue_clock_press(); break;
168
case DIGITAL_CLOCK_IDX: digital_clock_press(); break;
169
}
170
break;
171
case SETTINGS_MODE_IDX: settings_mode_press(); break;
172
}
173
break;
174
175
case 2:
176
// long press
177
switch( _major_mode ) {
178
case MAIN_MODE_IDX:
179
if( ++_minor_mode >= 3 )
180
_minor_mode = 0;
181
activate_minor_mode();
182
break;
183
case SETTINGS_MODE_IDX: settings_mode_long_press(); break;
184
}
185
break;
186
187
case 3:
188
// looooong press (change major mode)
189
if( ++_major_mode > 1 )
190
_major_mode = 0;
191
activate_major_mode();
192
break;
125
// check for button presses
126
void checkButtons()
127
{
128
// update buttons
129
button.update();
130
131
// notice button presses
132
if( button.risingEdge() )
133
inc_draw_mode = true;
134
}
135
136
137
// keep track of time
138
void trackTime()
139
{
140
// previous time and any carried-over milliseconds
141
static unsigned long last_time = millis();
142
static unsigned long carry = 0;
143
144
// how many milliseonds have elapsed since we last checked?
145
unsigned long next_time = millis();
146
unsigned long delta = next_time - last_time + carry;
147
148
// update the previous time and carried-over milliseconds
149
last_time = next_time;
150
carry = delta % 1000;
151
152
// add the seconds that have passed to the time
153
time_seconds += delta / 1000;
154
while( time_seconds >= 60 ) {
155
time_seconds -= 60;
156
time_minutes++;
157
if( time_minutes >= 60 ) {
158
time_minutes -= 60;
159
time_hours++;
160
if( time_hours >= 24 )
161
time_hours -= 24;
193
162
}
194
163
}
195
164
}
196
165
197
166
167
// turn an led on/off
168
void ledOn( int num, bool on )
169
{
170
if( num < 0 || num > 9 ) return;
171
172
// convert to pin no.
173
num += 4;
174
175
// pin 4 needs to be inverted (it's driving a PNP)
176
// NOTE: PIN 4 TEMPORARILY DISABLED
177
// if( num == 4 ) on = true;
178
if( num == 4 ) on = !on;
179
180
digitalWrite( num, on? HIGH : LOW );
181
}
182
183
184
// draw a segment for the test display
185
void drawNextSegment_test( int segment )
186
{
187
// turn on inside and outside LEDs
188
ledOn( 9, true );
189
190
// display segment number in binary across in the inside LEDs,
191
// with the LED on pin 12 showing the least-significant bit
192
for( int a = 0; a < 9; a++ )
193
ledOn( 8 - a, ( segment >> a ) & 1 );
194
}
195
196
197
// draw a segment for the time display
198
void drawNextSegment_time( int segment )
199
{
200
int second = segment / NUM_SECOND_SEGMENTS;
201
int second_segment = segment % NUM_SECOND_SEGMENTS;
202
203
// what needs to be drawn?
204
bool draw_tick = !second_segment && second % 5 == 0;
205
bool draw_second = !second_segment && second == time_seconds;
206
bool draw_minute = !second_segment && second == time_minutes;
207
bool draw_hour = !second_segment && second == time_hours;
208
209
// set the LEDs
210
ledOn( 9, true );
211
ledOn( 8, draw_tick || draw_minute );
212
for( int a = 6; a <= 7; a++ )
213
ledOn( a, draw_minute || draw_second );
214
for( int a = 0; a <= 5; a++ )
215
ledOn( a, draw_minute || draw_second || draw_hour );
216
}
217
218
198
219
// draw a display segment
199
void draw_next_segment( bool reset )
220
void drawNextSegment( bool reset )
200
221
{
222
static int draw_mode = 0;
223
201
224
// keep track of segment
202
225
#if CLOCK_FORWARD
203
static int segment = ( NUM_SEGMENTS - CLOCK_SHIFT ) % NUM_SEGMENTS;
204
if( reset ) segment = ( NUM_SEGMENTS - CLOCK_SHIFT ) % NUM_SEGMENTS;
226
static int segment = 0;
227
if( reset ) segment = 0;
205
228
#else
206
static int segment = NUM_SEGMENTS - 1 - CLOCK_SHIFT;
207
if( reset ) segment = NUM_SEGMENTS - 1 - CLOCK_SHIFT;
229
static int segment = NUM_SEGMENTS - 1;
230
if( reset ) segment = NUM_SEGMENTS - 1;
208
231
#endif
209
232
210
// reset the text renderer
211
TextRenderer::reset_buffer();
212
213
// frame reset
214
if( reset ) {
215
switch( _major_mode ) {
216
case MAIN_MODE_IDX:
217
switch( _minor_mode ) {
218
case ANALOGUE_CLOCK_IDX: analogue_clock_draw_reset(); break;
219
case DIGITAL_CLOCK_IDX: digital_clock_draw_reset(); break;
220
}
221
break;
222
case SETTINGS_MODE_IDX: settings_mode_draw_reset(); break;
223
}
224
225
// tell the text services we're starting a new frame
226
Text::draw_reset();
227
}
228
229
// draw
230
switch( _major_mode ) {
231
case MAIN_MODE_IDX:
232
switch( _minor_mode ) {
233
case ANALOGUE_CLOCK_IDX: analogue_clock_draw( segment ); break;
234
case DIGITAL_CLOCK_IDX: digital_clock_draw( segment ); break;
235
case TEST_PATTERN_IDX: test_pattern_draw( segment ); break;
236
}
237
break;
238
case SETTINGS_MODE_IDX: settings_mode_draw( segment ); break;
239
}
240
241
// draw any text that was rendered
242
TextRenderer::output_buffer();
233
// handle mode switch requests
234
if( reset && inc_draw_mode ) {
235
inc_draw_mode = false;
236
draw_mode++;
237
if( draw_mode >= 2 )
238
draw_mode = 0;
239
}
240
241
// draw the segment
242
switch( draw_mode ) {
243
case 0: drawNextSegment_test( segment ); break;
244
case 1: drawNextSegment_time( segment ); break;
245
}
243
246
244
247
#if CLOCK_FORWARD
245
if( ++segment >= NUM_SEGMENTS ) segment = 0;
248
segment++;
246
249
#else
247
if( --segment < 0 ) segment = NUM_SEGMENTS - 1;
250
segment--;
248
251
#endif
249
252
}
250
253
251
254
252
255
// calculate time constants when a new pulse has occurred
253
void calculate_segment_times()
256
void calculateSegmentTimes()
254
257
{
255
258
// check for overflows, and only recalculate times if there isn't
256
259
// one (if there is, we'll just go with the last pulse's times)
257
if( _new_pulse_at > _last_pulse_at )
260
if( new_pulse_at > last_pulse_at )
258
261
{
259
262
// new segment stepping times
260
unsigned long delta = _new_pulse_at - _last_pulse_at;
261
_segment_step = delta / NUM_SEGMENTS;
262
_segment_step_sub = 0;
263
_segment_step_sub_step = delta % NUM_SEGMENTS;
263
unsigned long delta = new_pulse_at - last_pulse_at;
264
segment_step = delta / NUM_SEGMENTS;
265
segment_step_sub = 0;
266
segment_step_sub_step = delta % NUM_SEGMENTS;
264
267
}
265
268
266
269
// now we have dealt with this pulse, save the pulse time and
267
270
// clear new_pulse_at, ready for the next pulse
268
_last_pulse_at = _new_pulse_at;
269
_new_pulse_at = 0;
271
last_pulse_at = new_pulse_at;
272
new_pulse_at = 0;
270
273
}
271
274
272
275
273
276
// wait until it is time to draw the next segment or a new pulse has
274
277
// occurred
275
void wait_till_end_of_segment( bool reset )
278
void waitTillNextSegment( bool reset )
276
279
{
277
280
static unsigned long end_time = 0;
278
281
279
282
// handle reset
280
283
if( reset )
281
end_time = _last_pulse_at;
284
end_time = last_pulse_at;
282
285
283
286
// work out the time that this segment should be displayed until
284
end_time += _segment_step;
285
_segment_step_sub += _segment_step_sub_step;
286
if( _segment_step_sub >= NUM_SEGMENTS ) {
287
_segment_step_sub -= NUM_SEGMENTS;
287
end_time += segment_step;
288
segment_step_sub += segment_step_sub_step;
289
if( segment_step_sub >= NUM_SEGMENTS ) {
290
segment_step_sub -= NUM_SEGMENTS;
288
291
end_time++;
289
292
}
290
293
291
294
// wait
292
while( micros() < end_time && !_new_pulse_at );
295
while( micros() < end_time && !new_pulse_at );
293
296
}
294
297
295
298
296
299
// ISR to handle the pulses from the fan's tachiometer
297
void fan_pulse_handler()
300
void fanPulseHandler()
298
301
{
299
302
// the fan actually sends two pulses per revolution. These pulses
300
303
// may not be exactly evenly distributed around the rotation, so
305
308
if( !ignore )
306
309
{
307
310
// set a new pulse time
308
_new_pulse_at = micros();
311
new_pulse_at = micros();
309
312
}
310
313
}
311
314
314
317
void setup()
315
318
{
316
319
// set up an interrupt handler on pin 2 to nitice fan pulses
317
attachInterrupt( 0, fan_pulse_handler, RISING );
320
attachInterrupt( 0, fanPulseHandler, RISING );
318
321
digitalWrite( 2, HIGH );
319
322
320
323
// set up output pins (4 to 13) for the led array
324
327
// set up mode-switch button on pin 3
325
328
pinMode( 3, INPUT );
326
329
digitalWrite( 3, HIGH );
327
static int event_times[] = { 5, 500, 4000, 0 };
328
_button.set_event_times( event_times );
329
330
// initialise RTC
331
Time::init();
332
333
// activate the minor mode
334
activate_major_mode();
330
331
// get the time from the real-time clock
332
int rtc_data[ 7 ];
333
RTC.get( rtc_data, true );
334
time_hours = rtc_data[ DS1307_HR ];
335
time_minutes = rtc_data[ DS1307_MIN ];
336
time_seconds = rtc_data[ DS1307_SEC ];
337
338
// serial comms
339
Serial.begin( 9600 );
335
340
}
336
341
337
342
339
344
void loop()
340
345
{
341
346
// if there has been a new pulse, we'll be resetting the display
342
bool reset = _new_pulse_at? true : false;
343
344
// update button
345
_button.update();
347
bool reset = new_pulse_at? true : false;
346
348
347
349
// only do this stuff at the start of a display cycle, to ensure
348
350
// that no state changes mid-display
349
351
if( reset )
350
352
{
351
// calculate segment times
352
calculate_segment_times();
353
// check buttons
354
checkButtons();
353
355
354
356
// keep track of time
355
Time::update();
356
357
// perform button events
358
do_button_events();
357
trackTime();
359
358
}
360
359
361
360
// draw this segment
362
draw_next_segment( reset );
361
drawNextSegment( reset );
362
363
// do we need to recalculate segment times?
364
if( reset )
365
calculateSegmentTimes();
363
366
364
367
// wait till it's time to draw the next segment
365
wait_till_end_of_segment( reset );
368
waitTillNextSegment( reset );
366
369
}
Loggerhead is a web-based interface for Breezy
Version: 2.0.2.dev0