To get this branch, use:
bzr branch
http://bzr.ed.am/elec/propeller-clock
« back to all changes in this revision
Viewing changes to src/propeller-clock.ino
- browse files at revision 53
- compare with another revision
- download diff
- download tarball
- view history from revision 53
- Committer: edam
- Date: 2012-02-23 00:26:32 UTC
- Revision ID: edam@waxworlds.org-20120223002632-kkwrdwijfmv45f0j
conrtol segment number from one place and reverse the order the segments are drawn (backwards clock!)
- files added:
- src/util/Bounce.cpp
- files removed:
- src/button.cc
- src/modes
- test/rtc-test
- test/rtc-test/Makefile
- test/rtc-test/util
- files renamed:
- src/propeller-clock.cc => src/propeller-clock.ino
- files modified:
- .bzrignore
- src/Makefile
added
removed
src/propeller-clock.ino
28
28
29
29
* a PC fan is wired up to a 12V power supply
30
30
31
* the fan's SENSE (tachometer) pin connected to pin 2 on the
32
Arduino.
31
* the fan's SENSE (tachiometer) pin connected to pin 2 on the
32
arduino.
33
33
34
* the pins 4 to 13 on the Arduino should directly drive an LED (the
34
* the pins 4 to 13 on the arduino should directly drive an LED (the
35
35
LED on pin 4 is in the centre of the clock face and the LED on pin
36
36
13 is at the outside.
37
37
38
38
* if a longer hand (and a larger clock face) is desired, pin 4 can be
39
39
used to indirectly drive a transistor which in turn drives several
40
LEDs that turn on and off in unison in the centre of the clock.
40
LEDs that turn on anf off in unison in the centre of the clock.
41
41
42
42
* a button should be attached to pin 3 that grounds it when pressed.
43
43
44
* A DS1307 remote clock is connected via I2C on analogue pins 4 and 5.
44
* A DS1307 remote clock is connected via I2C on analog pins 4 and 5.
45
45
46
46
Implementation details:
47
47
50
50
* the timing of the drawing of the clock face is recalculated with
51
51
every rotation of the propeller.
52
52
53
* a PC fan actually sends 2 tachometer pulses per revolution, so the
53
* a PC fan actually sends 2 tachiometer pulses per revolution, so the
54
54
software skips every other one. This means that the clock may
55
55
appear upside-down if started with the propeller in the wrong
56
position. You will need to experiment to discover the position that
56
position. You will need to experiment to dicsover the position that
57
57
the propeller must be in when starting the clock.
58
58
59
59
Usage instructions:
75
75
76
76
******************************************************************************/
77
77
78
#include "config.h"
79
#include "button.h"
80
#include "time.h"
81
#include "Arduino.h"
82
#include "modes/analogue_clock.h"
83
#include "modes/digital_clock.h"
84
#include "modes/test_pattern.h"
85
#include "modes/settings_mode.h"
86
#include "text.h"
87
#include "text_renderer.h"
88
#include "common.h"
78
79
#include <Bounce.h>
80
#include <DS1307.h>
81
#include <Wire.h>
89
82
90
83
//_____________________________________________________________________________
91
84
// data
92
85
86
93
87
// when non-zero, the time (in microseconds) of a new fan pulse that
94
88
// has just occurred, which means that segment drawing needs to be
95
89
// restarted
96
static unsigned long _new_pulse_at = 0;
90
static unsigned long new_pulse_at = 0;
97
91
98
92
// the time (in microseconds) when the last fan pulse occurred
99
static unsigned long _last_pulse_at = 0;
93
static unsigned long last_pulse_at = 0;
100
94
101
95
// duration (in microseconds) that a segment should be displayed
102
static unsigned long _segment_step = 0;
96
static unsigned long segment_step = 0;
103
97
104
98
// remainder after divisor and a tally of the remainders for each segment
105
static unsigned long _segment_step_sub_step = 0;
106
static unsigned long _segment_step_sub = 0;
107
108
// the button
109
static Button _button( 3 );
110
111
// modes
112
static int _major_mode = 0;
113
static int _minor_mode = 0;
114
115
#define MAIN_MODE_IDX 1
116
#define SETTINGS_MODE_IDX 0
117
118
#define ANALOGUE_CLOCK_IDX 0
119
#define DIGITAL_CLOCK_IDX 1
120
#define TEST_PATTERN_IDX 2
99
static unsigned long segment_step_sub_step = 0;
100
static unsigned long segment_step_sub = 0;
101
102
// flag to indicate that the drawing mode should be cycled to the next one
103
static bool inc_draw_mode = false;
104
105
// a bounce-managed button
106
static Bounce button( 3, 50 );
107
108
// the time
109
static int time_hours = 0;
110
static int time_minutes = 0;
111
static int time_seconds = 0;
112
113
// number of segments in a full display (rotation) is 60 (one per
114
// second) times the desired number of sub-divisions of a second
115
#define NUM_SECOND_SEGMENTS 5
116
#define NUM_SEGMENTS ( 60 * NUM_SECOND_SEGMENTS )
117
118
// clock direction
119
#define CLOCK_FORWARD 0
121
120
122
121
//_____________________________________________________________________________
123
122
// code
124
123
125
124
126
// activate the current minor mode
127
void activate_minor_mode()
128
{
129
// reset text
130
Text::reset();
131
leds_off();
132
133
// give the mode a chance to init
134
switch( _minor_mode ) {
135
case ANALOGUE_CLOCK_IDX: analogue_clock_activate(); break;
136
case DIGITAL_CLOCK_IDX: digital_clock_activate(); break;
137
}
138
}
139
140
141
// activate major mode
142
void activate_major_mode()
143
{
144
// reset text
145
Text::reset();
146
leds_off();
147
148
// reset buttons
149
_button.set_press_mode( _major_mode != SETTINGS_MODE_IDX );
150
151
// give the mode a chance to init
152
switch( _major_mode ) {
153
case MAIN_MODE_IDX: activate_minor_mode(); break;
154
case SETTINGS_MODE_IDX: settings_mode_activate(); break;
155
}
156
}
157
158
159
// perform button events
160
void do_button_events()
161
{
162
// loop through pending events
163
while( int event = _button.get_event() )
164
{
165
switch( event )
166
{
167
case 1:
168
// short press
169
switch( _major_mode ) {
170
case MAIN_MODE_IDX:
171
switch( _minor_mode ) {
172
case ANALOGUE_CLOCK_IDX: analogue_clock_press(); break;
173
case DIGITAL_CLOCK_IDX: digital_clock_press(); break;
174
}
175
break;
176
case SETTINGS_MODE_IDX: settings_mode_press(); break;
177
}
178
break;
179
180
case 2:
181
// long press
182
switch( _major_mode ) {
183
case MAIN_MODE_IDX:
184
if( ++_minor_mode >= 3 )
185
_minor_mode = 0;
186
activate_minor_mode();
187
break;
188
case SETTINGS_MODE_IDX: settings_mode_long_press(); break;
189
}
190
break;
191
192
case 3:
193
// looooong press (change major mode)
194
if( ++_major_mode > 1 )
195
_major_mode = 0;
196
activate_major_mode();
197
break;
125
// check for button presses
126
void checkButtons()
127
{
128
// update buttons
129
button.update();
130
131
// notice button presses
132
if( button.risingEdge() )
133
inc_draw_mode = true;
134
}
135
136
137
// keep track of time
138
void trackTime()
139
{
140
// previous time and any carried-over milliseconds
141
static unsigned long last_time = millis();
142
static unsigned long carry = 0;
143
144
// how many milliseonds have elapsed since we last checked?
145
unsigned long next_time = millis();
146
unsigned long delta = next_time - last_time + carry;
147
148
// update the previous time and carried-over milliseconds
149
last_time = next_time;
150
carry = delta % 1000;
151
152
// add the seconds that have passed to the time
153
time_seconds += delta / 1000;
154
while( time_seconds >= 60 ) {
155
time_seconds -= 60;
156
time_minutes++;
157
if( time_minutes >= 60 ) {
158
time_minutes -= 60;
159
time_hours++;
160
if( time_hours >= 24 )
161
time_hours -= 24;
198
162
}
199
163
}
200
164
}
201
165
202
166
167
// turn an led on/off
168
void ledOn( int num, bool on )
169
{
170
if( num < 0 || num > 9 ) return;
171
172
// convert to pin no.
173
num += 4;
174
175
// pin 4 needs to be inverted (it's driving a PNP)
176
// NOTE: PIN 4 TEMPORARILY DISABLED
177
// if( num == 4 ) on = true;
178
if( num == 4 ) on = !on;
179
180
digitalWrite( num, on? HIGH : LOW );
181
}
182
183
184
// draw a segment for the test display
185
void drawNextSegment_test( int segment )
186
{
187
// turn on inside and outside LEDs
188
ledOn( 9, true );
189
190
// display segment number in binary across in the inside LEDs,
191
// with the LED on pin 12 showing the least-significant bit
192
for( int a = 0; a < 9; a++ )
193
ledOn( 8 - a, ( segment >> a ) & 1 );
194
}
195
196
197
// draw a segment for the time display
198
void drawNextSegment_time( int segment )
199
{
200
int second = segment / NUM_SECOND_SEGMENTS;
201
int second_segment = segment % NUM_SECOND_SEGMENTS;
202
203
// what needs to be drawn?
204
bool draw_tick = !second_segment && second % 5 == 0;
205
bool draw_second = !second_segment && second == time_seconds;
206
bool draw_minute = !second_segment && second == time_minutes;
207
bool draw_hour = !second_segment && second == time_hours;
208
209
// set the LEDs
210
ledOn( 9, true );
211
ledOn( 8, draw_tick || draw_minute );
212
for( int a = 6; a <= 7; a++ )
213
ledOn( a, draw_minute || draw_second );
214
for( int a = 0; a <= 5; a++ )
215
ledOn( a, draw_minute || draw_second || draw_hour );
216
}
217
218
203
219
// draw a display segment
204
void draw_next_segment( bool reset )
220
void drawNextSegment( bool reset )
205
221
{
222
static int draw_mode = 0;
223
206
224
// keep track of segment
207
225
#if CLOCK_FORWARD
208
static int segment = ( NUM_SEGMENTS - CLOCK_SHIFT ) % NUM_SEGMENTS;
209
if( reset ) segment = ( NUM_SEGMENTS - CLOCK_SHIFT ) % NUM_SEGMENTS;
226
static int segment = 0;
227
if( reset ) segment = 0;
210
228
#else
211
static int segment = NUM_SEGMENTS - 1 - CLOCK_SHIFT;
212
if( reset ) segment = NUM_SEGMENTS - 1 - CLOCK_SHIFT;
229
static int segment = NUM_SEGMENTS - 1;
230
if( reset ) segment = NUM_SEGMENTS - 1;
213
231
#endif
214
232
215
// reset the text renderer
216
TextRenderer::reset_buffer();
217
218
// frame reset
219
if( reset ) {
220
switch( _major_mode ) {
221
case MAIN_MODE_IDX:
222
switch( _minor_mode ) {
223
case ANALOGUE_CLOCK_IDX: analogue_clock_draw_reset(); break;
224
case DIGITAL_CLOCK_IDX: digital_clock_draw_reset(); break;
225
}
226
break;
227
case SETTINGS_MODE_IDX: settings_mode_draw_reset(); break;
228
}
229
230
// tell the text services we're starting a new frame
231
Text::draw_reset();
232
}
233
234
// draw
235
switch( _major_mode ) {
236
case MAIN_MODE_IDX:
237
switch( _minor_mode ) {
238
case ANALOGUE_CLOCK_IDX: analogue_clock_draw( segment ); break;
239
case DIGITAL_CLOCK_IDX: digital_clock_draw( segment ); break;
240
case TEST_PATTERN_IDX: test_pattern_draw( segment ); break;
241
}
242
break;
243
case SETTINGS_MODE_IDX: settings_mode_draw( segment ); break;
244
}
245
246
// draw any text that was rendered
247
TextRenderer::output_buffer();
233
// handle mode switch requests
234
if( reset && inc_draw_mode ) {
235
inc_draw_mode = false;
236
draw_mode++;
237
if( draw_mode >= 2 )
238
draw_mode = 0;
239
}
240
241
// draw the segment
242
switch( draw_mode ) {
243
case 0: drawNextSegment_test( segment ); break;
244
case 1: drawNextSegment_time( segment ); break;
245
}
248
246
249
247
#if CLOCK_FORWARD
250
if( ++segment >= NUM_SEGMENTS ) segment = 0;
248
segment++;
251
249
#else
252
if( --segment < 0 ) segment = NUM_SEGMENTS - 1;
250
segment--;
253
251
#endif
254
252
}
255
253
256
254
257
255
// calculate time constants when a new pulse has occurred
258
void calculate_segment_times()
256
void calculateSegmentTimes()
259
257
{
260
258
// check for overflows, and only recalculate times if there isn't
261
259
// one (if there is, we'll just go with the last pulse's times)
262
if( _new_pulse_at > _last_pulse_at )
260
if( new_pulse_at > last_pulse_at )
263
261
{
264
262
// new segment stepping times
265
unsigned long delta = _new_pulse_at - _last_pulse_at;
266
_segment_step = delta / NUM_SEGMENTS;
267
_segment_step_sub = 0;
268
_segment_step_sub_step = delta % NUM_SEGMENTS;
263
unsigned long delta = new_pulse_at - last_pulse_at;
264
segment_step = delta / NUM_SEGMENTS;
265
segment_step_sub = 0;
266
segment_step_sub_step = delta % NUM_SEGMENTS;
269
267
}
270
268
271
269
// now we have dealt with this pulse, save the pulse time and
272
270
// clear new_pulse_at, ready for the next pulse
273
_last_pulse_at = _new_pulse_at;
274
_new_pulse_at = 0;
271
last_pulse_at = new_pulse_at;
272
new_pulse_at = 0;
275
273
}
276
274
277
275
278
276
// wait until it is time to draw the next segment or a new pulse has
279
277
// occurred
280
void wait_till_end_of_segment( bool reset )
278
void waitTillNextSegment( bool reset )
281
279
{
282
280
static unsigned long end_time = 0;
283
281
284
282
// handle reset
285
283
if( reset )
286
end_time = _last_pulse_at;
284
end_time = last_pulse_at;
287
285
288
286
// work out the time that this segment should be displayed until
289
end_time += _segment_step;
290
_segment_step_sub += _segment_step_sub_step;
291
if( _segment_step_sub >= NUM_SEGMENTS ) {
292
_segment_step_sub -= NUM_SEGMENTS;
287
end_time += segment_step;
288
segment_step_sub += segment_step_sub_step;
289
if( segment_step_sub >= NUM_SEGMENTS ) {
290
segment_step_sub -= NUM_SEGMENTS;
293
291
end_time++;
294
292
}
295
293
296
294
// wait
297
while( micros() < end_time && !_new_pulse_at );
295
while( micros() < end_time && !new_pulse_at );
298
296
}
299
297
300
298
301
299
// ISR to handle the pulses from the fan's tachiometer
302
void fan_pulse_handler()
300
void fanPulseHandler()
303
301
{
304
302
// the fan actually sends two pulses per revolution. These pulses
305
303
// may not be exactly evenly distributed around the rotation, so
310
308
if( !ignore )
311
309
{
312
310
// set a new pulse time
313
_new_pulse_at = micros();
311
new_pulse_at = micros();
314
312
}
315
313
}
316
314
319
317
void setup()
320
318
{
321
319
// set up an interrupt handler on pin 2 to nitice fan pulses
322
attachInterrupt( 0, fan_pulse_handler, RISING );
320
attachInterrupt( 0, fanPulseHandler, RISING );
323
321
digitalWrite( 2, HIGH );
324
322
325
323
// set up output pins (4 to 13) for the led array
329
327
// set up mode-switch button on pin 3
330
328
pinMode( 3, INPUT );
331
329
digitalWrite( 3, HIGH );
332
static int event_times[] = { 5, 500, 4000, 0 };
333
_button.set_event_times( event_times );
334
335
// initialise RTC
336
Time::init();
337
338
// init text renderer
339
TextRenderer::init();
340
341
// activate the minor mode
342
activate_major_mode();
330
331
// get the time from the real-time clock
332
int rtc_data[ 7 ];
333
RTC.get( rtc_data, true );
334
time_hours = rtc_data[ DS1307_HR ];
335
time_minutes = rtc_data[ DS1307_MIN ];
336
time_seconds = rtc_data[ DS1307_SEC ];
337
338
// serial comms
339
Serial.begin( 9600 );
343
340
}
344
341
345
342
347
344
void loop()
348
345
{
349
346
// if there has been a new pulse, we'll be resetting the display
350
bool reset = _new_pulse_at? true : false;
351
352
// update button
353
_button.update();
347
bool reset = new_pulse_at? true : false;
354
348
355
349
// only do this stuff at the start of a display cycle, to ensure
356
350
// that no state changes mid-display
357
351
if( reset )
358
352
{
359
// calculate segment times
360
calculate_segment_times();
353
// check buttons
354
checkButtons();
361
355
362
356
// keep track of time
363
Time::update();
364
365
// perform button events
366
do_button_events();
357
trackTime();
367
358
}
368
359
369
360
// draw this segment
370
draw_next_segment( reset );
361
drawNextSegment( reset );
362
363
// do we need to recalculate segment times?
364
if( reset )
365
calculateSegmentTimes();
371
366
372
367
// wait till it's time to draw the next segment
373
wait_till_end_of_segment( reset );
368
waitTillNextSegment( reset );
374
369
}
Loggerhead is a web-based interface for Breezy
Version: 2.0.2.dev0