To get this branch, use:
bzr branch
http://bzr.ed.am/elec/propeller-clock
« back to all changes in this revision
Viewing changes to src/propeller-clock.ino
- browse files at revision 55
- compare with another revision
- download diff
- download tarball
- view history from revision 55
- Committer: edam
- Date: 2012-02-25 01:29:52 UTC
- Revision ID: tim@ed.am-20120225012952-32q8gg07aovk3qxh
updated arduino.mk
- files added:
- src/util/Bounce.cpp
- files removed:
- src/analogue_clock.cc
- test/rtc-test
- test/rtc-test/util
- files renamed:
- src/propeller-clock.cc => src/propeller-clock.ino
- files modified:
- .bzrignore
- src/Makefile
added
removed
src/propeller-clock.ino
28
28
29
29
* a PC fan is wired up to a 12V power supply
30
30
31
* the fan's SENSE (tachometer) pin connected to pin 2 on the
32
Arduino.
31
* the fan's SENSE (tachiometer) pin connected to pin 2 on the
32
arduino.
33
33
34
* the pins 4 to 13 on the Arduino should directly drive an LED (the
34
* the pins 4 to 13 on the arduino should directly drive an LED (the
35
35
LED on pin 4 is in the centre of the clock face and the LED on pin
36
36
13 is at the outside.
37
37
38
38
* if a longer hand (and a larger clock face) is desired, pin 4 can be
39
39
used to indirectly drive a transistor which in turn drives several
40
LEDs that turn on and off in unison in the centre of the clock.
40
LEDs that turn on anf off in unison in the centre of the clock.
41
41
42
42
* a button should be attached to pin 3 that grounds it when pressed.
43
43
44
* A DS1307 remote clock is connected via I2C on analogue pins 4 and 5.
44
* A DS1307 remote clock is connected via I2C on analog pins 4 and 5.
45
45
46
46
Implementation details:
47
47
50
50
* the timing of the drawing of the clock face is recalculated with
51
51
every rotation of the propeller.
52
52
53
* a PC fan actually sends 2 tachometer pulses per revolution, so the
53
* a PC fan actually sends 2 tachiometer pulses per revolution, so the
54
54
software skips every other one. This means that the clock may
55
55
appear upside-down if started with the propeller in the wrong
56
position. You will need to experiment to discover the position that
56
position. You will need to experiment to dicsover the position that
57
57
the propeller must be in when starting the clock.
58
58
59
59
Usage instructions:
75
75
76
76
******************************************************************************/
77
77
78
#include "config.h"
79
#include "button.h"
80
#include "time.h"
81
#include "Arduino.h"
82
#include "analogue_clock.h"
83
#include "digital_clock.h"
84
#include "test_pattern.h"
85
#include "settings_mode.h"
86
#include "text.h"
87
#include "text_renderer.h"
88
#include "common.h"
78
79
#include <Bounce.h>
80
#include <DS1307.h>
81
#include <Wire.h>
89
82
90
83
//_____________________________________________________________________________
91
84
// data
92
85
86
93
87
// when non-zero, the time (in microseconds) of a new fan pulse that
94
88
// has just occurred, which means that segment drawing needs to be
95
89
// restarted
96
static unsigned long _new_pulse_at = 0;
90
static unsigned long new_pulse_at = 0;
97
91
98
92
// the time (in microseconds) when the last fan pulse occurred
99
static unsigned long _last_pulse_at = 0;
93
static unsigned long last_pulse_at = 0;
100
94
101
95
// duration (in microseconds) that a segment should be displayed
102
static unsigned long _segment_step = 0;
96
static unsigned long segment_step = 0;
103
97
104
98
// remainder after divisor and a tally of the remainders for each segment
105
static unsigned long _segment_step_sub_step = 0;
106
static unsigned long _segment_step_sub = 0;
107
108
// the button
109
static Button _button( 3 );
110
111
// modes
112
static int _major_mode = 0;
113
static int _minor_mode = 0;
114
115
#define MAIN_MODE_IDX 1
116
#define SETTINGS_MODE_IDX 0
117
118
#define ANALOGUE_CLOCK_IDX 0
119
#define DIGITAL_CLOCK_IDX 1
120
#define TEST_PATTERN_IDX 2
99
static unsigned long segment_step_sub_step = 0;
100
static unsigned long segment_step_sub = 0;
101
102
// flag to indicate that the drawing mode should be cycled to the next one
103
static bool inc_draw_mode = false;
104
105
// a bounce-managed button
106
static Bounce button( 3, 50 );
107
108
// the time
109
static int time_hours = 0;
110
static int time_minutes = 0;
111
static int time_seconds = 0;
112
113
// number of segments in a full display (rotation) is 60 (one per
114
// second) times the desired number of sub-divisions of a second
115
#define NUM_SECOND_SEGMENTS 5
116
#define NUM_SEGMENTS ( 60 * NUM_SECOND_SEGMENTS )
117
118
// clock draw direction
119
#define CLOCK_FORWARD 0
120
121
// rotate display (in segments)
122
#define CLOCK_SHIFT ( 58 * NUM_SECOND_SEGMENTS - 1 )
121
123
122
124
//_____________________________________________________________________________
123
125
// code
124
126
125
127
126
// activate the current minor mode
127
void activate_minor_mode()
128
{
129
switch( _minor_mode ) {
130
case ANALOGUE_CLOCK_IDX: analogue_clock_activate(); break;
131
case DIGITAL_CLOCK_IDX: digital_clock_activate(); break;
132
}
133
134
// reset text
135
Text::reset();
136
leds_off();
137
}
138
139
140
// activate major mode
141
void activate_major_mode()
142
{
143
switch( _major_mode ) {
144
case MAIN_MODE_IDX: activate_minor_mode(); break;
145
case SETTINGS_MODE_IDX: settings_mode_activate(); break;
146
}
147
148
// reset text
149
Text::reset();
150
leds_off();
151
}
152
153
154
// perform button events
155
void do_button_events()
156
{
157
// loop through pending events
158
while( int event = _button.get_event() )
159
{
160
switch( event )
161
{
162
case 1:
163
// short press
164
switch( _major_mode ) {
165
case MAIN_MODE_IDX:
166
switch( _minor_mode ) {
167
case ANALOGUE_CLOCK_IDX: analogue_clock_press(); break;
168
case DIGITAL_CLOCK_IDX: digital_clock_press(); break;
169
}
170
break;
171
case SETTINGS_MODE_IDX: settings_mode_press(); break;
172
}
173
break;
174
175
case 2:
176
// long press
177
switch( _major_mode ) {
178
case MAIN_MODE_IDX:
179
if( ++_minor_mode >= 3 )
180
_minor_mode = 0;
181
activate_minor_mode();
182
break;
183
case SETTINGS_MODE_IDX: settings_mode_long_press(); break;
184
}
185
break;
186
187
case 3:
188
// looooong press (change major mode)
189
if( ++_major_mode > 1 )
190
_major_mode = 0;
191
activate_major_mode();
192
break;
128
// check for button presses
129
void checkButtons()
130
{
131
// update buttons
132
button.update();
133
134
// notice button presses
135
if( button.risingEdge() )
136
inc_draw_mode = true;
137
}
138
139
140
// keep track of time
141
void trackTime()
142
{
143
// previous time and any carried-over milliseconds
144
static unsigned long last_time = millis();
145
static unsigned long carry = 0;
146
147
// how many milliseonds have elapsed since we last checked?
148
unsigned long next_time = millis();
149
unsigned long delta = next_time - last_time + carry;
150
151
// update the previous time and carried-over milliseconds
152
last_time = next_time;
153
carry = delta % 1000;
154
155
// add the seconds that have passed to the time
156
time_seconds += delta / 1000;
157
while( time_seconds >= 60 ) {
158
time_seconds -= 60;
159
time_minutes++;
160
if( time_minutes >= 60 ) {
161
time_minutes -= 60;
162
time_hours++;
163
if( time_hours >= 24 )
164
time_hours -= 24;
193
165
}
194
166
}
195
167
}
196
168
197
169
170
// turn an led on/off
171
void ledOn( int num, bool on )
172
{
173
if( num < 0 || num > 9 ) return;
174
175
// convert to pin no.
176
num += 4;
177
178
// pin 4 needs to be inverted (it's driving a PNP)
179
if( num == 4 ) on = !on;
180
181
digitalWrite( num, on? HIGH : LOW );
182
}
183
184
185
// draw a segment for the test display
186
void drawNextSegment_test( int segment )
187
{
188
// turn on outside LEDs
189
ledOn( 9, true );
190
191
// display segment number in binary across in the inside LEDs,
192
// with the LED on pin 12 showing the least-significant bit
193
for( int a = 0; a < 9; a++ )
194
ledOn( 8 - a, ( segment >> a ) & 1 );
195
}
196
197
198
// draw a segment for the time display
199
void drawNextSegment_time( int segment )
200
{
201
int second = segment / NUM_SECOND_SEGMENTS;
202
int second_segment = segment % NUM_SECOND_SEGMENTS;
203
204
// what needs to be drawn?
205
bool draw_tick = ( !second_segment && second % 5 == 0 && second ) ||
206
( second == 0 && second_segment == 1 ) ||
207
( second == 59 && second_segment == NUM_SECOND_SEGMENTS - 1 );
208
bool draw_second = !second_segment && second == time_seconds;
209
bool draw_minute = !second_segment && second == time_minutes;
210
bool draw_hour = segment == time_hours * 5 * NUM_SECOND_SEGMENTS +
211
( 5 * NUM_SECOND_SEGMENTS * time_minutes / 60 );
212
213
// set the LEDs
214
ledOn( 9, true );
215
ledOn( 8, draw_tick || draw_second );
216
for( int a = 6; a <= 7; a++ )
217
ledOn( a, draw_minute || draw_second );
218
for( int a = 0; a <= 5; a++ )
219
ledOn( a, draw_minute || draw_second || draw_hour );
220
}
221
222
198
223
// draw a display segment
199
void draw_next_segment( bool reset )
224
void drawNextSegment( bool reset )
200
225
{
226
static int draw_mode = 0;
227
201
228
// keep track of segment
202
229
#if CLOCK_FORWARD
203
230
static int segment = ( NUM_SEGMENTS - CLOCK_SHIFT ) % NUM_SEGMENTS;
207
234
if( reset ) segment = NUM_SEGMENTS - 1 - CLOCK_SHIFT;
208
235
#endif
209
236
210
// reset the text renderer
211
TextRenderer::reset_buffer();
212
213
// frame reset
214
if( reset ) {
215
switch( _major_mode ) {
216
case MAIN_MODE_IDX:
217
switch( _minor_mode ) {
218
case ANALOGUE_CLOCK_IDX: analogue_clock_draw_reset(); break;
219
case DIGITAL_CLOCK_IDX: digital_clock_draw_reset(); break;
220
}
221
break;
222
case SETTINGS_MODE_IDX: settings_mode_draw_reset(); break;
223
}
224
225
// tell the text services we're starting a new frame
226
Text::draw_reset();
227
}
228
229
// draw
230
switch( _major_mode ) {
231
case MAIN_MODE_IDX:
232
switch( _minor_mode ) {
233
case ANALOGUE_CLOCK_IDX: analogue_clock_draw( segment ); break;
234
case DIGITAL_CLOCK_IDX: digital_clock_draw( segment ); break;
235
case TEST_PATTERN_IDX: test_pattern_draw( segment ); break;
236
}
237
break;
238
case SETTINGS_MODE_IDX: settings_mode_draw( segment ); break;
239
}
240
241
// draw any text that was rendered
242
TextRenderer::output_buffer();
237
// handle mode switch requests
238
if( reset && inc_draw_mode ) {
239
inc_draw_mode = false;
240
draw_mode++;
241
if( draw_mode >= 2 )
242
draw_mode = 0;
243
}
244
245
// draw the segment
246
switch( draw_mode ) {
247
case 0: drawNextSegment_test( segment ); break;
248
case 1: drawNextSegment_time( segment ); break;
249
}
243
250
244
251
#if CLOCK_FORWARD
245
252
if( ++segment >= NUM_SEGMENTS ) segment = 0;
250
257
251
258
252
259
// calculate time constants when a new pulse has occurred
253
void calculate_segment_times()
260
void calculateSegmentTimes()
254
261
{
255
262
// check for overflows, and only recalculate times if there isn't
256
263
// one (if there is, we'll just go with the last pulse's times)
257
if( _new_pulse_at > _last_pulse_at )
264
if( new_pulse_at > last_pulse_at )
258
265
{
259
266
// new segment stepping times
260
unsigned long delta = _new_pulse_at - _last_pulse_at;
261
_segment_step = delta / NUM_SEGMENTS;
262
_segment_step_sub = 0;
263
_segment_step_sub_step = delta % NUM_SEGMENTS;
267
unsigned long delta = new_pulse_at - last_pulse_at;
268
segment_step = delta / NUM_SEGMENTS;
269
segment_step_sub = 0;
270
segment_step_sub_step = delta % NUM_SEGMENTS;
264
271
}
265
272
266
273
// now we have dealt with this pulse, save the pulse time and
267
274
// clear new_pulse_at, ready for the next pulse
268
_last_pulse_at = _new_pulse_at;
269
_new_pulse_at = 0;
275
last_pulse_at = new_pulse_at;
276
new_pulse_at = 0;
270
277
}
271
278
272
279
273
280
// wait until it is time to draw the next segment or a new pulse has
274
281
// occurred
275
void wait_till_end_of_segment( bool reset )
282
void waitTillNextSegment( bool reset )
276
283
{
277
284
static unsigned long end_time = 0;
278
285
279
286
// handle reset
280
287
if( reset )
281
end_time = _last_pulse_at;
288
end_time = last_pulse_at;
282
289
283
290
// work out the time that this segment should be displayed until
284
end_time += _segment_step;
285
_segment_step_sub += _segment_step_sub_step;
286
if( _segment_step_sub >= NUM_SEGMENTS ) {
287
_segment_step_sub -= NUM_SEGMENTS;
291
end_time += segment_step;
292
segment_step_sub += segment_step_sub_step;
293
if( segment_step_sub >= NUM_SEGMENTS ) {
294
segment_step_sub -= NUM_SEGMENTS;
288
295
end_time++;
289
296
}
290
297
291
298
// wait
292
while( micros() < end_time && !_new_pulse_at );
299
while( micros() < end_time && !new_pulse_at );
293
300
}
294
301
295
302
296
303
// ISR to handle the pulses from the fan's tachiometer
297
void fan_pulse_handler()
304
void fanPulseHandler()
298
305
{
299
306
// the fan actually sends two pulses per revolution. These pulses
300
307
// may not be exactly evenly distributed around the rotation, so
305
312
if( !ignore )
306
313
{
307
314
// set a new pulse time
308
_new_pulse_at = micros();
315
new_pulse_at = micros();
309
316
}
310
317
}
311
318
314
321
void setup()
315
322
{
316
323
// set up an interrupt handler on pin 2 to nitice fan pulses
317
attachInterrupt( 0, fan_pulse_handler, RISING );
324
attachInterrupt( 0, fanPulseHandler, RISING );
318
325
digitalWrite( 2, HIGH );
319
326
320
327
// set up output pins (4 to 13) for the led array
324
331
// set up mode-switch button on pin 3
325
332
pinMode( 3, INPUT );
326
333
digitalWrite( 3, HIGH );
327
static int event_times[] = { 5, 500, 4000, 0 };
328
_button.set_event_times( event_times );
329
330
// initialise RTC
331
Time::init();
332
333
// activate the minor mode
334
activate_major_mode();
334
335
// get the time from the real-time clock
336
int rtc_data[ 7 ];
337
RTC.get( rtc_data, true );
338
time_hours = rtc_data[ DS1307_HR ];
339
time_minutes = rtc_data[ DS1307_MIN ];
340
time_seconds = rtc_data[ DS1307_SEC ];
341
342
// serial comms
343
Serial.begin( 9600 );
335
344
}
336
345
337
346
339
348
void loop()
340
349
{
341
350
// if there has been a new pulse, we'll be resetting the display
342
bool reset = _new_pulse_at? true : false;
343
344
// update button
345
_button.update();
351
bool reset = new_pulse_at? true : false;
346
352
347
353
// only do this stuff at the start of a display cycle, to ensure
348
354
// that no state changes mid-display
349
355
if( reset )
350
356
{
351
// calculate segment times
352
calculate_segment_times();
357
// check buttons
358
checkButtons();
353
359
354
360
// keep track of time
355
Time::update();
356
357
// perform button events
358
do_button_events();
361
trackTime();
359
362
}
360
363
361
364
// draw this segment
362
draw_next_segment( reset );
365
drawNextSegment( reset );
366
367
// do we need to recalculate segment times?
368
if( reset )
369
calculateSegmentTimes();
363
370
364
371
// wait till it's time to draw the next segment
365
wait_till_end_of_segment( reset );
372
waitTillNextSegment( reset );
366
373
}
Loggerhead is a web-based interface for Breezy
Version: 2.0.2.dev0