To get this branch, use:
bzr branch
http://bzr.ed.am/elec/propeller-clock
« back to all changes in this revision
Viewing changes to src/propeller-clock.ino
- browse files at revision 55
- compare with another revision
- download diff
- download tarball
- view history from revision 55
- Committer: edam
- Date: 2012-02-25 01:29:52 UTC
- Revision ID: tim@ed.am-20120225012952-32q8gg07aovk3qxh
updated arduino.mk
- files added:
- src/util/Bounce.cpp
- files removed:
- src/analogue_clock.cc
- test/rtc-test
- test/rtc-test/util
- files renamed:
- src/propeller-clock.cc => src/propeller-clock.ino
- files modified:
- .bzrignore
- src/Makefile
added
removed
src/propeller-clock.ino
28
28
29
29
* a PC fan is wired up to a 12V power supply
30
30
31
* the fan's SENSE (tachometer) pin connected to pin 2 on the
32
Arduino.
31
* the fan's SENSE (tachiometer) pin connected to pin 2 on the
32
arduino.
33
33
34
* the pins 4 to 13 on the Arduino should directly drive an LED (the
34
* the pins 4 to 13 on the arduino should directly drive an LED (the
35
35
LED on pin 4 is in the centre of the clock face and the LED on pin
36
36
13 is at the outside.
37
37
38
38
* if a longer hand (and a larger clock face) is desired, pin 4 can be
39
39
used to indirectly drive a transistor which in turn drives several
40
LEDs that turn on and off in unison in the centre of the clock.
40
LEDs that turn on anf off in unison in the centre of the clock.
41
41
42
42
* a button should be attached to pin 3 that grounds it when pressed.
43
43
44
* A DS1307 remote clock is connected via I2C on analogue pins 4 and 5.
44
* A DS1307 remote clock is connected via I2C on analog pins 4 and 5.
45
45
46
46
Implementation details:
47
47
50
50
* the timing of the drawing of the clock face is recalculated with
51
51
every rotation of the propeller.
52
52
53
* a PC fan actually sends 2 tachometer pulses per revolution, so the
53
* a PC fan actually sends 2 tachiometer pulses per revolution, so the
54
54
software skips every other one. This means that the clock may
55
55
appear upside-down if started with the propeller in the wrong
56
position. You will need to experiment to discover the position that
56
position. You will need to experiment to dicsover the position that
57
57
the propeller must be in when starting the clock.
58
58
59
59
Usage instructions:
75
75
76
76
******************************************************************************/
77
77
78
#include "config.h"
79
#include "button.h"
80
#include "time.h"
81
#include "Arduino.h"
82
#include "analogue_clock.h"
83
#include "digital_clock.h"
84
#include "test_pattern.h"
85
#include "settings_mode.h"
86
#include "text.h"
87
#include "text_renderer.h"
88
#include "common.h"
78
79
#include <Bounce.h>
80
#include <DS1307.h>
81
#include <Wire.h>
89
82
90
83
//_____________________________________________________________________________
91
84
// data
92
85
86
93
87
// when non-zero, the time (in microseconds) of a new fan pulse that
94
88
// has just occurred, which means that segment drawing needs to be
95
89
// restarted
96
static unsigned long _new_pulse_at = 0;
90
static unsigned long new_pulse_at = 0;
97
91
98
92
// the time (in microseconds) when the last fan pulse occurred
99
static unsigned long _last_pulse_at = 0;
93
static unsigned long last_pulse_at = 0;
100
94
101
95
// duration (in microseconds) that a segment should be displayed
102
static unsigned long _segment_step = 0;
96
static unsigned long segment_step = 0;
103
97
104
98
// remainder after divisor and a tally of the remainders for each segment
105
static unsigned long _segment_step_sub_step = 0;
106
static unsigned long _segment_step_sub = 0;
107
108
// the button
109
static Button _button( 3 );
110
111
// modes
112
static int _major_mode = 0;
113
static int _minor_mode = 0;
114
115
#define MAIN_MODE_IDX 1
116
#define SETTINGS_MODE_IDX 0
117
118
#define ANALOGUE_CLOCK_IDX 0
119
#define DIGITAL_CLOCK_IDX 1
120
#define TEST_PATTERN_IDX 2
99
static unsigned long segment_step_sub_step = 0;
100
static unsigned long segment_step_sub = 0;
101
102
// flag to indicate that the drawing mode should be cycled to the next one
103
static bool inc_draw_mode = false;
104
105
// a bounce-managed button
106
static Bounce button( 3, 50 );
107
108
// the time
109
static int time_hours = 0;
110
static int time_minutes = 0;
111
static int time_seconds = 0;
112
113
// number of segments in a full display (rotation) is 60 (one per
114
// second) times the desired number of sub-divisions of a second
115
#define NUM_SECOND_SEGMENTS 5
116
#define NUM_SEGMENTS ( 60 * NUM_SECOND_SEGMENTS )
117
118
// clock draw direction
119
#define CLOCK_FORWARD 0
120
121
// rotate display (in segments)
122
#define CLOCK_SHIFT ( 58 * NUM_SECOND_SEGMENTS - 1 )
121
123
122
124
//_____________________________________________________________________________
123
125
// code
124
126
125
127
126
// activate the current minor mode
127
void activate_minor_mode()
128
{
129
// reset text
130
Text::reset();
131
leds_off();
132
133
// give the mode a chance to init
134
switch( _minor_mode ) {
135
case ANALOGUE_CLOCK_IDX: analogue_clock_activate(); break;
136
case DIGITAL_CLOCK_IDX: digital_clock_activate(); break;
137
}
138
}
139
140
141
// activate major mode
142
void activate_major_mode()
143
{
144
// reset text
145
Text::reset();
146
leds_off();
147
148
// give the mode a chance to init
149
switch( _major_mode ) {
150
case MAIN_MODE_IDX: activate_minor_mode(); break;
151
case SETTINGS_MODE_IDX: settings_mode_activate(); break;
152
}
153
}
154
155
156
// perform button events
157
void do_button_events()
158
{
159
// loop through pending events
160
while( int event = _button.get_event() )
161
{
162
switch( event )
163
{
164
case 1:
165
// short press
166
switch( _major_mode ) {
167
case MAIN_MODE_IDX:
168
switch( _minor_mode ) {
169
case ANALOGUE_CLOCK_IDX: analogue_clock_press(); break;
170
case DIGITAL_CLOCK_IDX: digital_clock_press(); break;
171
}
172
break;
173
case SETTINGS_MODE_IDX: settings_mode_press(); break;
174
}
175
break;
176
177
case 2:
178
// long press
179
switch( _major_mode ) {
180
case MAIN_MODE_IDX:
181
if( ++_minor_mode >= 3 )
182
_minor_mode = 0;
183
activate_minor_mode();
184
break;
185
case SETTINGS_MODE_IDX: settings_mode_long_press(); break;
186
}
187
break;
188
189
case 3:
190
// looooong press (change major mode)
191
if( ++_major_mode > 1 )
192
_major_mode = 0;
193
activate_major_mode();
194
break;
128
// check for button presses
129
void checkButtons()
130
{
131
// update buttons
132
button.update();
133
134
// notice button presses
135
if( button.risingEdge() )
136
inc_draw_mode = true;
137
}
138
139
140
// keep track of time
141
void trackTime()
142
{
143
// previous time and any carried-over milliseconds
144
static unsigned long last_time = millis();
145
static unsigned long carry = 0;
146
147
// how many milliseonds have elapsed since we last checked?
148
unsigned long next_time = millis();
149
unsigned long delta = next_time - last_time + carry;
150
151
// update the previous time and carried-over milliseconds
152
last_time = next_time;
153
carry = delta % 1000;
154
155
// add the seconds that have passed to the time
156
time_seconds += delta / 1000;
157
while( time_seconds >= 60 ) {
158
time_seconds -= 60;
159
time_minutes++;
160
if( time_minutes >= 60 ) {
161
time_minutes -= 60;
162
time_hours++;
163
if( time_hours >= 24 )
164
time_hours -= 24;
195
165
}
196
166
}
197
167
}
198
168
199
169
170
// turn an led on/off
171
void ledOn( int num, bool on )
172
{
173
if( num < 0 || num > 9 ) return;
174
175
// convert to pin no.
176
num += 4;
177
178
// pin 4 needs to be inverted (it's driving a PNP)
179
if( num == 4 ) on = !on;
180
181
digitalWrite( num, on? HIGH : LOW );
182
}
183
184
185
// draw a segment for the test display
186
void drawNextSegment_test( int segment )
187
{
188
// turn on outside LEDs
189
ledOn( 9, true );
190
191
// display segment number in binary across in the inside LEDs,
192
// with the LED on pin 12 showing the least-significant bit
193
for( int a = 0; a < 9; a++ )
194
ledOn( 8 - a, ( segment >> a ) & 1 );
195
}
196
197
198
// draw a segment for the time display
199
void drawNextSegment_time( int segment )
200
{
201
int second = segment / NUM_SECOND_SEGMENTS;
202
int second_segment = segment % NUM_SECOND_SEGMENTS;
203
204
// what needs to be drawn?
205
bool draw_tick = ( !second_segment && second % 5 == 0 && second ) ||
206
( second == 0 && second_segment == 1 ) ||
207
( second == 59 && second_segment == NUM_SECOND_SEGMENTS - 1 );
208
bool draw_second = !second_segment && second == time_seconds;
209
bool draw_minute = !second_segment && second == time_minutes;
210
bool draw_hour = segment == time_hours * 5 * NUM_SECOND_SEGMENTS +
211
( 5 * NUM_SECOND_SEGMENTS * time_minutes / 60 );
212
213
// set the LEDs
214
ledOn( 9, true );
215
ledOn( 8, draw_tick || draw_second );
216
for( int a = 6; a <= 7; a++ )
217
ledOn( a, draw_minute || draw_second );
218
for( int a = 0; a <= 5; a++ )
219
ledOn( a, draw_minute || draw_second || draw_hour );
220
}
221
222
200
223
// draw a display segment
201
void draw_next_segment( bool reset )
224
void drawNextSegment( bool reset )
202
225
{
226
static int draw_mode = 0;
227
203
228
// keep track of segment
204
229
#if CLOCK_FORWARD
205
230
static int segment = ( NUM_SEGMENTS - CLOCK_SHIFT ) % NUM_SEGMENTS;
209
234
if( reset ) segment = NUM_SEGMENTS - 1 - CLOCK_SHIFT;
210
235
#endif
211
236
212
// reset the text renderer
213
TextRenderer::reset_buffer();
214
215
// frame reset
216
if( reset ) {
217
switch( _major_mode ) {
218
case MAIN_MODE_IDX:
219
switch( _minor_mode ) {
220
case ANALOGUE_CLOCK_IDX: analogue_clock_draw_reset(); break;
221
case DIGITAL_CLOCK_IDX: digital_clock_draw_reset(); break;
222
}
223
break;
224
case SETTINGS_MODE_IDX: settings_mode_draw_reset(); break;
225
}
226
227
// tell the text services we're starting a new frame
228
Text::draw_reset();
229
}
230
231
// draw
232
switch( _major_mode ) {
233
case MAIN_MODE_IDX:
234
switch( _minor_mode ) {
235
case ANALOGUE_CLOCK_IDX: analogue_clock_draw( segment ); break;
236
case DIGITAL_CLOCK_IDX: digital_clock_draw( segment ); break;
237
case TEST_PATTERN_IDX: test_pattern_draw( segment ); break;
238
}
239
break;
240
case SETTINGS_MODE_IDX: settings_mode_draw( segment ); break;
241
}
242
243
// draw any text that was rendered
244
TextRenderer::output_buffer();
237
// handle mode switch requests
238
if( reset && inc_draw_mode ) {
239
inc_draw_mode = false;
240
draw_mode++;
241
if( draw_mode >= 2 )
242
draw_mode = 0;
243
}
244
245
// draw the segment
246
switch( draw_mode ) {
247
case 0: drawNextSegment_test( segment ); break;
248
case 1: drawNextSegment_time( segment ); break;
249
}
245
250
246
251
#if CLOCK_FORWARD
247
252
if( ++segment >= NUM_SEGMENTS ) segment = 0;
252
257
253
258
254
259
// calculate time constants when a new pulse has occurred
255
void calculate_segment_times()
260
void calculateSegmentTimes()
256
261
{
257
262
// check for overflows, and only recalculate times if there isn't
258
263
// one (if there is, we'll just go with the last pulse's times)
259
if( _new_pulse_at > _last_pulse_at )
264
if( new_pulse_at > last_pulse_at )
260
265
{
261
266
// new segment stepping times
262
unsigned long delta = _new_pulse_at - _last_pulse_at;
263
_segment_step = delta / NUM_SEGMENTS;
264
_segment_step_sub = 0;
265
_segment_step_sub_step = delta % NUM_SEGMENTS;
267
unsigned long delta = new_pulse_at - last_pulse_at;
268
segment_step = delta / NUM_SEGMENTS;
269
segment_step_sub = 0;
270
segment_step_sub_step = delta % NUM_SEGMENTS;
266
271
}
267
272
268
273
// now we have dealt with this pulse, save the pulse time and
269
274
// clear new_pulse_at, ready for the next pulse
270
_last_pulse_at = _new_pulse_at;
271
_new_pulse_at = 0;
275
last_pulse_at = new_pulse_at;
276
new_pulse_at = 0;
272
277
}
273
278
274
279
275
280
// wait until it is time to draw the next segment or a new pulse has
276
281
// occurred
277
void wait_till_end_of_segment( bool reset )
282
void waitTillNextSegment( bool reset )
278
283
{
279
284
static unsigned long end_time = 0;
280
285
281
286
// handle reset
282
287
if( reset )
283
end_time = _last_pulse_at;
288
end_time = last_pulse_at;
284
289
285
290
// work out the time that this segment should be displayed until
286
end_time += _segment_step;
287
_segment_step_sub += _segment_step_sub_step;
288
if( _segment_step_sub >= NUM_SEGMENTS ) {
289
_segment_step_sub -= NUM_SEGMENTS;
291
end_time += segment_step;
292
segment_step_sub += segment_step_sub_step;
293
if( segment_step_sub >= NUM_SEGMENTS ) {
294
segment_step_sub -= NUM_SEGMENTS;
290
295
end_time++;
291
296
}
292
297
293
298
// wait
294
while( micros() < end_time && !_new_pulse_at );
299
while( micros() < end_time && !new_pulse_at );
295
300
}
296
301
297
302
298
303
// ISR to handle the pulses from the fan's tachiometer
299
void fan_pulse_handler()
304
void fanPulseHandler()
300
305
{
301
306
// the fan actually sends two pulses per revolution. These pulses
302
307
// may not be exactly evenly distributed around the rotation, so
307
312
if( !ignore )
308
313
{
309
314
// set a new pulse time
310
_new_pulse_at = micros();
315
new_pulse_at = micros();
311
316
}
312
317
}
313
318
316
321
void setup()
317
322
{
318
323
// set up an interrupt handler on pin 2 to nitice fan pulses
319
attachInterrupt( 0, fan_pulse_handler, RISING );
324
attachInterrupt( 0, fanPulseHandler, RISING );
320
325
digitalWrite( 2, HIGH );
321
326
322
327
// set up output pins (4 to 13) for the led array
326
331
// set up mode-switch button on pin 3
327
332
pinMode( 3, INPUT );
328
333
digitalWrite( 3, HIGH );
329
static int event_times[] = { 5, 500, 4000, 0 };
330
_button.set_event_times( event_times );
331
332
// initialise RTC
333
Time::init();
334
335
// activate the minor mode
336
activate_major_mode();
334
335
// get the time from the real-time clock
336
int rtc_data[ 7 ];
337
RTC.get( rtc_data, true );
338
time_hours = rtc_data[ DS1307_HR ];
339
time_minutes = rtc_data[ DS1307_MIN ];
340
time_seconds = rtc_data[ DS1307_SEC ];
341
342
// serial comms
343
Serial.begin( 9600 );
337
344
}
338
345
339
346
341
348
void loop()
342
349
{
343
350
// if there has been a new pulse, we'll be resetting the display
344
bool reset = _new_pulse_at? true : false;
345
346
// update button
347
_button.update();
351
bool reset = new_pulse_at? true : false;
348
352
349
353
// only do this stuff at the start of a display cycle, to ensure
350
354
// that no state changes mid-display
351
355
if( reset )
352
356
{
353
// calculate segment times
354
calculate_segment_times();
357
// check buttons
358
checkButtons();
355
359
356
360
// keep track of time
357
Time::update();
358
359
// perform button events
360
do_button_events();
361
trackTime();
361
362
}
362
363
363
364
// draw this segment
364
draw_next_segment( reset );
365
drawNextSegment( reset );
366
367
// do we need to recalculate segment times?
368
if( reset )
369
calculateSegmentTimes();
365
370
366
371
// wait till it's time to draw the next segment
367
wait_till_end_of_segment( reset );
372
waitTillNextSegment( reset );
368
373
}
Loggerhead is a web-based interface for Breezy
Version: 2.0.2.dev0