29
29
* a PC fan is wired up to a 12V power supply
31
* the fan's SENSE (tachometer) pin connected to pin 2 on the
31
* the fan's SENSE (tachiometer) pin connected to pin 2 on the
34
* the pins 4 to 13 on the Arduino should directly drive an LED (the
34
* the pins 4 to 13 on the arduino should directly drive an LED (the
35
35
LED on pin 4 is in the centre of the clock face and the LED on pin
36
36
13 is at the outside.
38
38
* if a longer hand (and a larger clock face) is desired, pin 4 can be
39
39
used to indirectly drive a transistor which in turn drives several
40
LEDs that turn on and off in unison in the centre of the clock.
40
LEDs that turn on anf off in unison in the centre of the clock.
42
42
* a button should be attached to pin 3 that grounds it when pressed.
44
* A DS1307 remote clock is connected via I2C on analogue pins 4 and 5.
44
* A DS1307 remote clock is connected via I2C on analog pins 4 and 5.
46
46
Implementation details:
50
50
* the timing of the drawing of the clock face is recalculated with
51
51
every rotation of the propeller.
53
* a PC fan actually sends 2 tachometer pulses per revolution, so the
53
* a PC fan actually sends 2 tachiometer pulses per revolution, so the
54
54
software skips every other one. This means that the clock may
55
55
appear upside-down if started with the propeller in the wrong
56
position. You will need to experiment to discover the position that
56
position. You will need to experiment to dicsover the position that
57
57
the propeller must be in when starting the clock.
59
59
Usage instructions:
76
76
******************************************************************************/
78
79
#include "config.h"
82
#include "modes/switcher_major_mode.h"
83
#include "modes/settings_major_mode.h"
84
#include "modes/analogue_clock_mode.h"
85
#include "modes/digital_clock_mode.h"
86
#include "modes/info_mode.h"
87
#include "modes/test_pattern_mode.h"
89
#include "text_renderer.h"
81
#include "mode_switcher.h"
92
84
//_____________________________________________________________________________
95
88
// when non-zero, the time (in microseconds) of a new fan pulse that
96
89
// has just occurred, which means that segment drawing needs to be
98
static unsigned long _new_pulse_at = 0;
91
static unsigned long new_pulse_at = 0;
100
93
// the time (in microseconds) when the last fan pulse occurred
101
static unsigned long _last_pulse_at = 0;
94
static unsigned long last_pulse_at = 0;
103
96
// duration (in microseconds) that a segment should be displayed
104
static unsigned long _segment_step = 0;
97
static unsigned long segment_step = 0;
106
99
// remainder after divisor and a tally of the remainders for each segment
107
static unsigned long _segment_step_sub_step = 0;
108
static unsigned long _segment_step_sub = 0;
100
static unsigned long segment_step_sub_step = 0;
101
static unsigned long segment_step_sub = 0;
111
static Button _button( 3 );
104
static Button button( 3 );
107
static int major_mode = 0;
114
static MajorMode *_modes[ 3 ];
116
// current major mode
117
static int _mode = 0;
110
static std::vector< MajorMode * > major_modes;
119
112
//_____________________________________________________________________________
122
// perform button events
123
void do_button_events()
116
// check for button presses
125
// loop through pending events
126
while( int event = _button.get_event() )
132
_modes[ _mode ]->press();
136
_modes[ _mode ]->long_press();
139
// looooong press (change major mode)
140
_modes[ _mode ]->deactivate();
141
if( !_modes[ ++_mode ] ) _mode = 0;
142
_modes[ _mode ]->activate();
120
int event = button.update();
125
major_modes[ major_mode ]->short_press();
128
major_modes[ major_mode ]->long_press();
131
if( ++major_mode >= major_modes.size() )
133
major_modes[ major_mode ]->activate();
149
139
// draw a display segment
150
void draw_next_segment( bool reset )
140
void drawNextSegment( bool reset )
152
142
// keep track of segment
153
143
#if CLOCK_FORWARD
158
148
if( reset ) segment = NUM_SEGMENTS - 1 - CLOCK_SHIFT;
161
// reset the text renderer's buffer
162
TextRenderer::reset_buffer();
166
_modes[ _mode ]->draw_reset();
168
// tell the text services we're starting a new frame
173
_modes[ _mode ]->draw( segment );
175
// TODO: remove this hack
178
// draw text rednerer's buffer
179
TextRenderer::output_buffer();
152
Drawer &drawer = major_modes[ major_mode ]->get_drawer();
153
if( reset ) drawer.draw_reset();
154
drawer.draw( segment );
181
156
#if CLOCK_FORWARD
182
157
if( ++segment >= NUM_SEGMENTS ) segment = 0;
189
164
// calculate time constants when a new pulse has occurred
190
void calculate_segment_times()
165
void calculateSegmentTimes()
192
167
// check for overflows, and only recalculate times if there isn't
193
168
// one (if there is, we'll just go with the last pulse's times)
194
if( _new_pulse_at > _last_pulse_at )
169
if( new_pulse_at > last_pulse_at )
196
171
// new segment stepping times
197
unsigned long delta = _new_pulse_at - _last_pulse_at;
198
_segment_step = delta / NUM_SEGMENTS;
199
_segment_step_sub = 0;
200
_segment_step_sub_step = delta % NUM_SEGMENTS;
172
unsigned long delta = new_pulse_at - last_pulse_at;
173
segment_step = delta / NUM_SEGMENTS;
174
segment_step_sub = 0;
175
segment_step_sub_step = delta % NUM_SEGMENTS;
203
178
// now we have dealt with this pulse, save the pulse time and
204
179
// clear new_pulse_at, ready for the next pulse
205
_last_pulse_at = _new_pulse_at;
180
last_pulse_at = new_pulse_at;
210
185
// wait until it is time to draw the next segment or a new pulse has
212
void wait_till_end_of_segment( bool reset )
187
void waitTillNextSegment( bool reset )
214
189
static unsigned long end_time = 0;
218
end_time = _last_pulse_at;
193
end_time = last_pulse_at;
220
195
// work out the time that this segment should be displayed until
221
end_time += _segment_step;
222
_segment_step_sub += _segment_step_sub_step;
223
if( _segment_step_sub >= NUM_SEGMENTS ) {
224
_segment_step_sub -= NUM_SEGMENTS;
196
end_time += segment_step;
197
segment_step_sub += segment_step_sub_step;
198
if( segment_step_sub >= NUM_SEGMENTS ) {
199
segment_step_sub -= NUM_SEGMENTS;
229
while( micros() < end_time && !_new_pulse_at );
204
while( micros() < end_time && !new_pulse_at );
233
// ISR to handle the pulses from the fan's tachometer
234
void fan_pulse_handler()
208
// ISR to handle the pulses from the fan's tachiometer
209
void fanPulseHandler()
236
211
// the fan actually sends two pulses per revolution. These pulses
237
212
// may not be exactly evenly distributed around the rotation, so
253
// set up an interrupt handler on pin 2 to notice fan pulses
254
attachInterrupt( 0, fan_pulse_handler, RISING );
228
// set up an interrupt handler on pin 2 to nitice fan pulses
229
attachInterrupt( 0, fanPulseHandler, RISING );
255
230
digitalWrite( 2, HIGH );
257
232
// set up output pins (4 to 13) for the led array
261
236
// set up mode-switch button on pin 3
262
237
pinMode( 3, INPUT );
263
238
digitalWrite( 3, HIGH );
264
static int event_times[] = { 5, 500, 4000, 0 };
265
_button.set_event_times( event_times );
270
// init text renderer
271
TextRenderer::init();
277
static SwitcherMajorMode switcher;
278
static SettingsMajorMode settings;
282
_modes[ mode++ ] = &switcher;
283
_modes[ mode++ ] = &settings;
286
// activate the current major mode
287
_modes[ _mode ]->activate();
239
button.add_event_at( 5, 1 );
240
button.add_event_at( 1000, 2 );
241
button.add_event_at( 4000, 3 );
244
Serial.begin( 9600 );
246
// set up major modes
247
static ModeSwitcher mode_switcher;
248
major_modes.push_back( &mode_switcher );
249
major_modes[ 0 ]->activate();
294
256
// if there has been a new pulse, we'll be resetting the display
295
bool reset = _new_pulse_at? true : false;
257
bool reset = new_pulse_at? true : false;
300
259
// only do this stuff at the start of a display cycle, to ensure
301
260
// that no state changes mid-display
304
// calculate segment times
305
calculate_segment_times();
307
266
// keep track of time
310
// perform button events
267
Time &time = Time::get_instance();
314
271
// draw this segment
315
draw_next_segment( reset );
272
drawNextSegment( reset );
274
// do we need to recalculate segment times?
276
calculateSegmentTimes();
317
278
// wait till it's time to draw the next segment
318
wait_till_end_of_segment( reset );
279
waitTillNextSegment( reset );
added
removed
src/propeller-clock.ino
