29
29
* a PC fan is wired up to a 12V power supply
31
* the fan's SENSE (tachiometer) pin connected to pin 2 on the
31
* the fan's SENSE (tachometer) pin connected to pin 2 on the
34
* the pins 4 to 13 on the arduino should directly drive an LED (the
34
* the pins 4 to 13 on the Arduino should directly drive an LED (the
35
35
LED on pin 4 is in the centre of the clock face and the LED on pin
36
36
13 is at the outside.
38
38
* if a longer hand (and a larger clock face) is desired, pin 4 can be
39
39
used to indirectly drive a transistor which in turn drives several
40
LEDs that turn on anf off in unison in the centre of the clock.
40
LEDs that turn on and off in unison in the centre of the clock.
42
42
* a button should be attached to pin 3 that grounds it when pressed.
44
* A DS1307 remote clock is connected via I2C on analog pins 4 and 5.
44
* A DS1307 remote clock is connected via I2C on analogue pins 4 and 5.
46
46
Implementation details:
50
50
* the timing of the drawing of the clock face is recalculated with
51
51
every rotation of the propeller.
53
* a PC fan actually sends 2 tachiometer pulses per revolution, so the
53
* a PC fan actually sends 2 tachometer pulses per revolution, so the
54
54
software skips every other one. This means that the clock may
55
55
appear upside-down if started with the propeller in the wrong
56
position. You will need to experiment to dicsover the position that
56
position. You will need to experiment to discover the position that
57
57
the propeller must be in when starting the clock.
59
59
Usage instructions:
76
76
******************************************************************************/
78
79
#include "button.h"
81
#include "mode_switcher.h"
82
#include "modes/analogue_clock.h"
83
#include "modes/digital_clock.h"
84
#include "modes/test_pattern.h"
85
#include "modes/settings_mode.h"
87
#include "text_renderer.h"
84
90
//_____________________________________________________________________________
88
93
// when non-zero, the time (in microseconds) of a new fan pulse that
89
94
// has just occurred, which means that segment drawing needs to be
91
static unsigned long new_pulse_at = 0;
96
static unsigned long _new_pulse_at = 0;
93
98
// the time (in microseconds) when the last fan pulse occurred
94
static unsigned long last_pulse_at = 0;
99
static unsigned long _last_pulse_at = 0;
96
101
// duration (in microseconds) that a segment should be displayed
97
static unsigned long segment_step = 0;
102
static unsigned long _segment_step = 0;
99
104
// remainder after divisor and a tally of the remainders for each segment
100
static unsigned long segment_step_sub_step = 0;
101
static unsigned long segment_step_sub = 0;
105
static unsigned long _segment_step_sub_step = 0;
106
static unsigned long _segment_step_sub = 0;
104
static Button button( 3 );
107
static int major_mode = 0;
110
static std::vector< MajorMode * > major_modes;
109
static Button _button( 3 );
112
static int _major_mode = 0;
113
static int _minor_mode = 0;
115
#define MAIN_MODE_IDX 1
116
#define SETTINGS_MODE_IDX 0
118
#define ANALOGUE_CLOCK_IDX 0
119
#define DIGITAL_CLOCK_IDX 1
120
#define TEST_PATTERN_IDX 2
112
122
//_____________________________________________________________________________
116
// check for button presses
120
int event = button.update();
125
major_modes[ major_mode ]->short_press();
128
major_modes[ major_mode ]->long_press();
131
if( ++major_mode >= major_modes.size() )
133
major_modes[ major_mode ]->activate();
126
// activate the current minor mode
127
void activate_minor_mode()
133
// give the mode a chance to init
134
switch( _minor_mode ) {
135
case ANALOGUE_CLOCK_IDX: analogue_clock_activate(); break;
136
case DIGITAL_CLOCK_IDX: digital_clock_activate(); break;
141
// activate major mode
142
void activate_major_mode()
149
_button.set_press_mode( _major_mode != SETTINGS_MODE_IDX );
151
// give the mode a chance to init
152
switch( _major_mode ) {
153
case MAIN_MODE_IDX: activate_minor_mode(); break;
154
case SETTINGS_MODE_IDX: settings_mode_activate(); break;
159
// perform button events
160
void do_button_events()
162
// loop through pending events
163
while( int event = _button.get_event() )
169
switch( _major_mode ) {
171
switch( _minor_mode ) {
172
case ANALOGUE_CLOCK_IDX: analogue_clock_press(); break;
173
case DIGITAL_CLOCK_IDX: digital_clock_press(); break;
176
case SETTINGS_MODE_IDX: settings_mode_press(); break;
182
switch( _major_mode ) {
184
if( ++_minor_mode >= 3 )
186
activate_minor_mode();
188
case SETTINGS_MODE_IDX: settings_mode_long_press(); break;
193
// looooong press (change major mode)
194
if( ++_major_mode > 1 )
196
activate_major_mode();
139
203
// draw a display segment
140
void drawNextSegment( bool reset )
204
void draw_next_segment( bool reset )
142
206
// keep track of segment
143
207
#if CLOCK_FORWARD
148
212
if( reset ) segment = NUM_SEGMENTS - 1 - CLOCK_SHIFT;
215
// reset the text renderer
216
TextRenderer::reset_buffer();
220
switch( _major_mode ) {
222
switch( _minor_mode ) {
223
case ANALOGUE_CLOCK_IDX: analogue_clock_draw_reset(); break;
224
case DIGITAL_CLOCK_IDX: digital_clock_draw_reset(); break;
227
case SETTINGS_MODE_IDX: settings_mode_draw_reset(); break;
230
// tell the text services we're starting a new frame
152
Drawer &drawer = major_modes[ major_mode ]->get_drawer();
153
if( reset ) drawer.draw_reset();
154
drawer.draw( segment );
235
switch( _major_mode ) {
237
switch( _minor_mode ) {
238
case ANALOGUE_CLOCK_IDX: analogue_clock_draw( segment ); break;
239
case DIGITAL_CLOCK_IDX: digital_clock_draw( segment ); break;
240
case TEST_PATTERN_IDX: test_pattern_draw( segment ); break;
243
case SETTINGS_MODE_IDX: settings_mode_draw( segment ); break;
246
// draw any text that was rendered
247
TextRenderer::output_buffer();
156
249
#if CLOCK_FORWARD
157
250
if( ++segment >= NUM_SEGMENTS ) segment = 0;
164
257
// calculate time constants when a new pulse has occurred
165
void calculateSegmentTimes()
258
void calculate_segment_times()
167
260
// check for overflows, and only recalculate times if there isn't
168
261
// one (if there is, we'll just go with the last pulse's times)
169
if( new_pulse_at > last_pulse_at )
262
if( _new_pulse_at > _last_pulse_at )
171
264
// new segment stepping times
172
unsigned long delta = new_pulse_at - last_pulse_at;
173
segment_step = delta / NUM_SEGMENTS;
174
segment_step_sub = 0;
175
segment_step_sub_step = delta % NUM_SEGMENTS;
265
unsigned long delta = _new_pulse_at - _last_pulse_at;
266
_segment_step = delta / NUM_SEGMENTS;
267
_segment_step_sub = 0;
268
_segment_step_sub_step = delta % NUM_SEGMENTS;
178
271
// now we have dealt with this pulse, save the pulse time and
179
272
// clear new_pulse_at, ready for the next pulse
180
last_pulse_at = new_pulse_at;
273
_last_pulse_at = _new_pulse_at;
185
278
// wait until it is time to draw the next segment or a new pulse has
187
void waitTillNextSegment( bool reset )
280
void wait_till_end_of_segment( bool reset )
189
282
static unsigned long end_time = 0;
193
end_time = last_pulse_at;
286
end_time = _last_pulse_at;
195
288
// work out the time that this segment should be displayed until
196
end_time += segment_step;
197
segment_step_sub += segment_step_sub_step;
198
if( segment_step_sub >= NUM_SEGMENTS ) {
199
segment_step_sub -= NUM_SEGMENTS;
289
end_time += _segment_step;
290
_segment_step_sub += _segment_step_sub_step;
291
if( _segment_step_sub >= NUM_SEGMENTS ) {
292
_segment_step_sub -= NUM_SEGMENTS;
204
while( micros() < end_time && !new_pulse_at );
297
while( micros() < end_time && !_new_pulse_at );
208
301
// ISR to handle the pulses from the fan's tachiometer
209
void fanPulseHandler()
302
void fan_pulse_handler()
211
304
// the fan actually sends two pulses per revolution. These pulses
212
305
// may not be exactly evenly distributed around the rotation, so
236
329
// set up mode-switch button on pin 3
237
330
pinMode( 3, INPUT );
238
331
digitalWrite( 3, HIGH );
239
button.add_event_at( 5, 1 );
240
button.add_event_at( 1000, 2 );
241
button.add_event_at( 4000, 3 );
244
Serial.begin( 9600 );
246
// set up major modes
247
static ModeSwitcher mode_switcher;
248
major_modes.push_back( &mode_switcher );
249
major_modes[ 0 ]->activate();
332
static int event_times[] = { 5, 500, 4000, 0 };
333
_button.set_event_times( event_times );
338
// init text renderer
339
TextRenderer::init();
341
// activate the minor mode
342
activate_major_mode();
256
349
// if there has been a new pulse, we'll be resetting the display
257
bool reset = new_pulse_at? true : false;
350
bool reset = _new_pulse_at? true : false;
259
355
// only do this stuff at the start of a display cycle, to ensure
260
356
// that no state changes mid-display
359
// calculate segment times
360
calculate_segment_times();
266
362
// keep track of time
267
Time &time = Time::get_instance();
365
// perform button events
271
369
// draw this segment
272
drawNextSegment( reset );
274
// do we need to recalculate segment times?
276
calculateSegmentTimes();
370
draw_next_segment( reset );
278
372
// wait till it's time to draw the next segment
279
waitTillNextSegment( reset );
373
wait_till_end_of_segment( reset );
added
removed
src/propeller-clock.cc
