To get this branch, use:
bzr branch
http://bzr.ed.am/elec/propeller-clock
« back to all changes in this revision
Viewing changes to src/propeller-clock.cc
- browse files at revision 82
- compare with another revision
- download diff
- download tarball
- view history from revision 82
- Committer: Tim Marston
- Date: 2012-05-09 21:36:01 UTC
- Revision ID: tim@ed.am-20120509213601-kk1tqa9yg4xk45y9
added info mode, a '/' to the fonts and cleaned up a couple of bits
- files added:
- src/button.cc
- src/modes
- test/rtc-test
- test/rtc-test/Makefile
- test/rtc-test/util
- files removed:
- src/util/Bounce.cpp
- files renamed:
- src/propeller-clock.ino => src/propeller-clock.cc
- files modified:
- .bzrignore
- src/Makefile
added
removed
src/propeller-clock.cc
28
28
29
29
* a PC fan is wired up to a 12V power supply
30
30
31
* the fan's SENSE (tachiometer) pin connected to pin 2 on the
32
arduino.
31
* the fan's SENSE (tachometer) pin connected to pin 2 on the
32
Arduino.
33
33
34
* the pins 4 to 13 on the arduino should directly drive an LED (the
34
* the pins 4 to 13 on the Arduino should directly drive an LED (the
35
35
LED on pin 4 is in the centre of the clock face and the LED on pin
36
36
13 is at the outside.
37
37
38
38
* if a longer hand (and a larger clock face) is desired, pin 4 can be
39
39
used to indirectly drive a transistor which in turn drives several
40
LEDs that turn on anf off in unison in the centre of the clock.
40
LEDs that turn on and off in unison in the centre of the clock.
41
41
42
42
* a button should be attached to pin 3 that grounds it when pressed.
43
43
44
* A DS1307 remote clock is connected via I2C on analog pins 4 and 5.
44
* A DS1307 remote clock is connected via I2C on analogue pins 4 and 5.
45
45
46
46
Implementation details:
47
47
50
50
* the timing of the drawing of the clock face is recalculated with
51
51
every rotation of the propeller.
52
52
53
* a PC fan actually sends 2 tachiometer pulses per revolution, so the
53
* a PC fan actually sends 2 tachometer pulses per revolution, so the
54
54
software skips every other one. This means that the clock may
55
55
appear upside-down if started with the propeller in the wrong
56
position. You will need to experiment to dicsover the position that
56
position. You will need to experiment to discover the position that
57
57
the propeller must be in when starting the clock.
58
58
59
59
Usage instructions:
75
75
76
76
******************************************************************************/
77
77
78
79
#include <Bounce.h>
80
#include <DS1307.h>
81
#include <Wire.h>
78
#include "config.h"
79
#include "button.h"
80
#include "time.h"
81
#include "Arduino.h"
82
#include "modes/analogue_clock.h"
83
#include "modes/digital_clock.h"
84
#include "modes/test_pattern.h"
85
#include "modes/settings_mode.h"
86
#include "modes/info_mode.h"
87
#include "text.h"
88
#include "text_renderer.h"
89
#include "common.h"
82
90
83
91
//_____________________________________________________________________________
84
92
// data
85
93
86
87
94
// when non-zero, the time (in microseconds) of a new fan pulse that
88
95
// has just occurred, which means that segment drawing needs to be
89
96
// restarted
90
static unsigned long new_pulse_at = 0;
97
static unsigned long _new_pulse_at = 0;
91
98
92
99
// the time (in microseconds) when the last fan pulse occurred
93
static unsigned long last_pulse_at = 0;
100
static unsigned long _last_pulse_at = 0;
94
101
95
102
// duration (in microseconds) that a segment should be displayed
96
static unsigned long segment_step = 0;
103
static unsigned long _segment_step = 0;
97
104
98
105
// remainder after divisor and a tally of the remainders for each segment
99
static unsigned long segment_step_sub_step = 0;
100
static unsigned long segment_step_sub = 0;
101
102
// flag to indicate that the drawing mode should be cycled to the next one
103
static bool inc_draw_mode = false;
104
105
// a bounce-managed button
106
static Bounce button( 3, 50 );
107
108
// the time
109
static int time_hours = 0;
110
static int time_minutes = 0;
111
static int time_seconds = 0;
112
113
// number of segments in a full display (rotation) is 60 (one per
114
// second) times the desired number of sub-divisions of a second
115
#define NUM_SECOND_SEGMENTS 5
116
#define NUM_SEGMENTS ( 60 * NUM_SECOND_SEGMENTS )
117
118
// clock direction
119
#define CLOCK_FORWARD 0
106
static unsigned long _segment_step_sub_step = 0;
107
static unsigned long _segment_step_sub = 0;
108
109
// the button
110
static Button _button( 3 );
111
112
// modes
113
static int _major_mode = 0;
114
static int _minor_mode = 0;
115
116
#define MAIN_MODE_IDX 1
117
#define SETTINGS_MODE_IDX 0
118
119
#define ANALOGUE_CLOCK_IDX 0
120
#define DIGITAL_CLOCK_IDX 1
121
#define TEST_PATTERN_IDX 2
122
#define INFO_MODE_IDX 3
120
123
121
124
//_____________________________________________________________________________
122
125
// code
123
126
124
127
125
// check for button presses
126
void checkButtons()
127
{
128
// update buttons
129
button.update();
130
131
// notice button presses
132
if( button.risingEdge() )
133
inc_draw_mode = true;
134
}
135
136
137
// keep track of time
138
void trackTime()
139
{
140
// previous time and any carried-over milliseconds
141
static unsigned long last_time = millis();
142
static unsigned long carry = 0;
143
144
// how many milliseonds have elapsed since we last checked?
145
unsigned long next_time = millis();
146
unsigned long delta = next_time - last_time + carry;
147
148
// update the previous time and carried-over milliseconds
149
last_time = next_time;
150
carry = delta % 1000;
151
152
// add the seconds that have passed to the time
153
time_seconds += delta / 1000;
154
while( time_seconds >= 60 ) {
155
time_seconds -= 60;
156
time_minutes++;
157
if( time_minutes >= 60 ) {
158
time_minutes -= 60;
159
time_hours++;
160
if( time_hours >= 24 )
161
time_hours -= 24;
128
// activate the current minor mode
129
void activate_minor_mode()
130
{
131
// reset text
132
Text::reset();
133
leds_off();
134
135
// give the mode a chance to init
136
switch( _minor_mode ) {
137
case ANALOGUE_CLOCK_IDX: analogue_clock_activate(); break;
138
case DIGITAL_CLOCK_IDX: digital_clock_activate(); break;
139
case INFO_MODE_IDX: info_mode_activate(); break;
140
}
141
}
142
143
144
// activate major mode
145
void activate_major_mode()
146
{
147
// reset text
148
Text::reset();
149
leds_off();
150
151
// reset buttons
152
_button.set_press_mode( _major_mode != SETTINGS_MODE_IDX );
153
154
// give the mode a chance to init
155
switch( _major_mode ) {
156
case MAIN_MODE_IDX: activate_minor_mode(); break;
157
case SETTINGS_MODE_IDX: settings_mode_activate(); break;
158
}
159
}
160
161
162
// perform button events
163
void do_button_events()
164
{
165
// loop through pending events
166
while( int event = _button.get_event() )
167
{
168
switch( event )
169
{
170
case 1:
171
// short press
172
switch( _major_mode ) {
173
case MAIN_MODE_IDX:
174
switch( _minor_mode ) {
175
case ANALOGUE_CLOCK_IDX: analogue_clock_press(); break;
176
case DIGITAL_CLOCK_IDX: digital_clock_press(); break;
177
case INFO_MODE_IDX: info_mode_press(); break;
178
}
179
break;
180
case SETTINGS_MODE_IDX: settings_mode_press(); break;
181
}
182
break;
183
184
case 2:
185
// long press
186
switch( _major_mode ) {
187
case MAIN_MODE_IDX:
188
if( ++_minor_mode >= 3 )
189
_minor_mode = 0;
190
activate_minor_mode();
191
break;
192
case SETTINGS_MODE_IDX: settings_mode_long_press(); break;
193
}
194
break;
195
196
case 3:
197
// looooong press (change major mode)
198
if( ++_major_mode > 1 )
199
_major_mode = 0;
200
activate_major_mode();
201
break;
162
202
}
163
203
}
164
204
}
165
205
166
206
167
// turn an led on/off
168
void ledOn( int num, bool on )
169
{
170
if( num < 0 || num > 9 ) return;
171
172
// convert to pin no.
173
num += 4;
174
175
// pin 4 needs to be inverted (it's driving a PNP)
176
// NOTE: PIN 4 TEMPORARILY DISABLED
177
// if( num == 4 ) on = true;
178
if( num == 4 ) on = !on;
179
180
digitalWrite( num, on? HIGH : LOW );
181
}
182
183
184
// draw a segment for the test display
185
void drawNextSegment_test( int segment )
186
{
187
// turn on inside and outside LEDs
188
ledOn( 9, true );
189
190
// display segment number in binary across in the inside LEDs,
191
// with the LED on pin 12 showing the least-significant bit
192
for( int a = 0; a < 9; a++ )
193
ledOn( 8 - a, ( segment >> a ) & 1 );
194
}
195
196
197
// draw a segment for the time display
198
void drawNextSegment_time( int segment )
199
{
200
int second = segment / NUM_SECOND_SEGMENTS;
201
int second_segment = segment % NUM_SECOND_SEGMENTS;
202
203
// what needs to be drawn?
204
bool draw_tick = !second_segment && second % 5 == 0;
205
bool draw_second = !second_segment && second == time_seconds;
206
bool draw_minute = !second_segment && second == time_minutes;
207
bool draw_hour = !second_segment && second == time_hours;
208
209
// set the LEDs
210
ledOn( 9, true );
211
ledOn( 8, draw_tick || draw_minute );
212
for( int a = 6; a <= 7; a++ )
213
ledOn( a, draw_minute || draw_second );
214
for( int a = 0; a <= 5; a++ )
215
ledOn( a, draw_minute || draw_second || draw_hour );
216
}
217
218
219
207
// draw a display segment
220
void drawNextSegment( bool reset )
208
void draw_next_segment( bool reset )
221
209
{
222
static int draw_mode = 0;
223
224
210
// keep track of segment
225
211
#if CLOCK_FORWARD
226
static int segment = 0;
227
if( reset ) segment = 0;
212
static int segment = ( NUM_SEGMENTS - CLOCK_SHIFT ) % NUM_SEGMENTS;
213
if( reset ) segment = ( NUM_SEGMENTS - CLOCK_SHIFT ) % NUM_SEGMENTS;
228
214
#else
229
static int segment = NUM_SEGMENTS - 1;
230
if( reset ) segment = NUM_SEGMENTS - 1;
215
static int segment = NUM_SEGMENTS - 1 - CLOCK_SHIFT;
216
if( reset ) segment = NUM_SEGMENTS - 1 - CLOCK_SHIFT;
231
217
#endif
232
218
233
// handle mode switch requests
234
if( reset && inc_draw_mode ) {
235
inc_draw_mode = false;
236
draw_mode++;
237
if( draw_mode >= 2 )
238
draw_mode = 0;
239
}
240
241
// draw the segment
242
switch( draw_mode ) {
243
case 0: drawNextSegment_test( segment ); break;
244
case 1: drawNextSegment_time( segment ); break;
245
}
219
// reset the text renderer
220
TextRenderer::reset_buffer();
221
222
// frame reset
223
if( reset ) {
224
switch( _major_mode ) {
225
case MAIN_MODE_IDX:
226
switch( _minor_mode ) {
227
case ANALOGUE_CLOCK_IDX: analogue_clock_draw_reset(); break;
228
case DIGITAL_CLOCK_IDX: digital_clock_draw_reset(); break;
229
case INFO_MODE_IDX: info_mode_draw_reset(); break;
230
}
231
break;
232
case SETTINGS_MODE_IDX: settings_mode_draw_reset(); break;
233
}
234
235
// tell the text services we're starting a new frame
236
Text::draw_reset();
237
}
238
239
// draw
240
switch( _major_mode ) {
241
case MAIN_MODE_IDX:
242
switch( _minor_mode ) {
243
case ANALOGUE_CLOCK_IDX: analogue_clock_draw( segment ); break;
244
case DIGITAL_CLOCK_IDX: digital_clock_draw( segment ); break;
245
case TEST_PATTERN_IDX: test_pattern_draw( segment ); break;
246
case INFO_MODE_IDX: info_mode_draw( segment ); break;
247
}
248
break;
249
case SETTINGS_MODE_IDX: settings_mode_draw( segment ); break;
250
}
251
252
// draw any text that was rendered
253
TextRenderer::output_buffer();
246
254
247
255
#if CLOCK_FORWARD
248
segment++;
256
if( ++segment >= NUM_SEGMENTS ) segment = 0;
249
257
#else
250
segment--;
258
if( --segment < 0 ) segment = NUM_SEGMENTS - 1;
251
259
#endif
252
260
}
253
261
254
262
255
263
// calculate time constants when a new pulse has occurred
256
void calculateSegmentTimes()
264
void calculate_segment_times()
257
265
{
258
266
// check for overflows, and only recalculate times if there isn't
259
267
// one (if there is, we'll just go with the last pulse's times)
260
if( new_pulse_at > last_pulse_at )
268
if( _new_pulse_at > _last_pulse_at )
261
269
{
262
270
// new segment stepping times
263
unsigned long delta = new_pulse_at - last_pulse_at;
264
segment_step = delta / NUM_SEGMENTS;
265
segment_step_sub = 0;
266
segment_step_sub_step = delta % NUM_SEGMENTS;
271
unsigned long delta = _new_pulse_at - _last_pulse_at;
272
_segment_step = delta / NUM_SEGMENTS;
273
_segment_step_sub = 0;
274
_segment_step_sub_step = delta % NUM_SEGMENTS;
267
275
}
268
276
269
277
// now we have dealt with this pulse, save the pulse time and
270
278
// clear new_pulse_at, ready for the next pulse
271
last_pulse_at = new_pulse_at;
272
new_pulse_at = 0;
279
_last_pulse_at = _new_pulse_at;
280
_new_pulse_at = 0;
273
281
}
274
282
275
283
276
284
// wait until it is time to draw the next segment or a new pulse has
277
285
// occurred
278
void waitTillNextSegment( bool reset )
286
void wait_till_end_of_segment( bool reset )
279
287
{
280
288
static unsigned long end_time = 0;
281
289
282
290
// handle reset
283
291
if( reset )
284
end_time = last_pulse_at;
292
end_time = _last_pulse_at;
285
293
286
294
// work out the time that this segment should be displayed until
287
end_time += segment_step;
288
segment_step_sub += segment_step_sub_step;
289
if( segment_step_sub >= NUM_SEGMENTS ) {
290
segment_step_sub -= NUM_SEGMENTS;
295
end_time += _segment_step;
296
_segment_step_sub += _segment_step_sub_step;
297
if( _segment_step_sub >= NUM_SEGMENTS ) {
298
_segment_step_sub -= NUM_SEGMENTS;
291
299
end_time++;
292
300
}
293
301
294
302
// wait
295
while( micros() < end_time && !new_pulse_at );
303
while( micros() < end_time && !_new_pulse_at );
296
304
}
297
305
298
306
299
// ISR to handle the pulses from the fan's tachiometer
300
void fanPulseHandler()
307
// ISR to handle the pulses from the fan's tachometer
308
void fan_pulse_handler()
301
309
{
302
310
// the fan actually sends two pulses per revolution. These pulses
303
311
// may not be exactly evenly distributed around the rotation, so
308
316
if( !ignore )
309
317
{
310
318
// set a new pulse time
311
new_pulse_at = micros();
319
_new_pulse_at = micros();
312
320
}
313
321
}
314
322
316
324
// main setup
317
325
void setup()
318
326
{
319
// set up an interrupt handler on pin 2 to nitice fan pulses
320
attachInterrupt( 0, fanPulseHandler, RISING );
327
// set up an interrupt handler on pin 2 to notice fan pulses
328
attachInterrupt( 0, fan_pulse_handler, RISING );
321
329
digitalWrite( 2, HIGH );
322
330
323
331
// set up output pins (4 to 13) for the led array
327
335
// set up mode-switch button on pin 3
328
336
pinMode( 3, INPUT );
329
337
digitalWrite( 3, HIGH );
330
331
// get the time from the real-time clock
332
int rtc_data[ 7 ];
333
RTC.get( rtc_data, true );
334
time_hours = rtc_data[ DS1307_HR ];
335
time_minutes = rtc_data[ DS1307_MIN ];
336
time_seconds = rtc_data[ DS1307_SEC ];
337
338
// serial comms
339
Serial.begin( 9600 );
338
static int event_times[] = { 5, 500, 4000, 0 };
339
_button.set_event_times( event_times );
340
341
// initialise RTC
342
Time::init();
343
344
// init text renderer
345
TextRenderer::init();
346
347
// activate the minor mode
348
activate_major_mode();
340
349
}
341
350
342
351
344
353
void loop()
345
354
{
346
355
// if there has been a new pulse, we'll be resetting the display
347
bool reset = new_pulse_at? true : false;
356
bool reset = _new_pulse_at? true : false;
357
358
// update button
359
_button.update();
348
360
349
361
// only do this stuff at the start of a display cycle, to ensure
350
362
// that no state changes mid-display
351
363
if( reset )
352
364
{
353
// check buttons
354
checkButtons();
365
// calculate segment times
366
calculate_segment_times();
355
367
356
368
// keep track of time
357
trackTime();
369
Time::update();
370
371
// perform button events
372
do_button_events();
358
373
}
359
374
360
375
// draw this segment
361
drawNextSegment( reset );
362
363
// do we need to recalculate segment times?
364
if( reset )
365
calculateSegmentTimes();
376
draw_next_segment( reset );
366
377
367
378
// wait till it's time to draw the next segment
368
waitTillNextSegment( reset );
379
wait_till_end_of_segment( reset );
369
380
}
Loggerhead is a web-based interface for Bazaar branches
Version: 1.18.2, Revision: 480