29
29
* a PC fan is wired up to a 12V power supply
31
* the fan's SENSE (tachiometer) pin connected to pin 2 on the
31
* the fan's SENSE (tachometer) pin connected to pin 2 on the
34
* the pins 4 to 13 on the arduino should directly drive an LED (the
34
* the pins 4 to 13 on the Arduino should directly drive an LED (the
35
35
LED on pin 4 is in the centre of the clock face and the LED on pin
36
36
13 is at the outside.
38
38
* if a longer hand (and a larger clock face) is desired, pin 4 can be
39
39
used to indirectly drive a transistor which in turn drives several
40
LEDs that turn on anf off in unison in the centre of the clock.
40
LEDs that turn on and off in unison in the centre of the clock.
42
42
* a button should be attached to pin 3 that grounds it when pressed.
44
* A DS1307 remote clock is connected via I2C on analog pins 4 and 5.
44
* A DS1307 remote clock is connected via I2C on analogue pins 4 and 5.
46
46
Implementation details:
50
50
* the timing of the drawing of the clock face is recalculated with
51
51
every rotation of the propeller.
53
* a PC fan actually sends 2 tachiometer pulses per revolution, so the
53
* a PC fan actually sends 2 tachometer pulses per revolution, so the
54
54
software skips every other one. This means that the clock may
55
55
appear upside-down if started with the propeller in the wrong
56
position. You will need to experiment to dicsover the position that
56
position. You will need to experiment to discover the position that
57
57
the propeller must be in when starting the clock.
59
59
Usage instructions:
76
76
******************************************************************************/
78
79
#include "button.h"
81
#include "mode_switcher.h"
82
#include "modes/switcher_major_mode.h"
83
#include "modes/settings_major_mode.h"
84
#include "modes/analogue_clock_mode.h"
85
#include "modes/digital_clock_mode.h"
86
#include "modes/info_mode.h"
87
#include "modes/test_pattern_mode.h"
89
#include "text_renderer.h"
84
92
//_____________________________________________________________________________
88
95
// when non-zero, the time (in microseconds) of a new fan pulse that
89
96
// has just occurred, which means that segment drawing needs to be
91
static unsigned long new_pulse_at = 0;
98
static unsigned long _new_pulse_at = 0;
93
100
// the time (in microseconds) when the last fan pulse occurred
94
static unsigned long last_pulse_at = 0;
101
static unsigned long _last_pulse_at = 0;
96
103
// duration (in microseconds) that a segment should be displayed
97
static unsigned long segment_step = 0;
104
static unsigned long _segment_step = 0;
99
106
// remainder after divisor and a tally of the remainders for each segment
100
static unsigned long segment_step_sub_step = 0;
101
static unsigned long segment_step_sub = 0;
107
static unsigned long _segment_step_sub_step = 0;
108
static unsigned long _segment_step_sub = 0;
104
static Button button( 3 );
107
static int major_mode = 0;
111
static Button _button( 3 );
110
static std::vector< MajorMode * > major_modes;
114
static MajorMode *_modes[ 3 ];
116
// current major mode
117
static int _mode = 0;
112
119
//_____________________________________________________________________________
116
// check for button presses
122
// perform button events
123
void do_button_events()
120
int event = button.update();
125
major_modes[ major_mode ]->short_press();
128
major_modes[ major_mode ]->long_press();
131
if( ++major_mode >= major_modes.size() )
133
major_modes[ major_mode ]->activate();
125
// loop through pending events
126
while( int event = _button.get_event() )
132
_modes[ _mode ]->press();
136
_modes[ _mode ]->long_press();
139
// looooong press (change major mode)
140
_modes[ _mode ]->deactivate();
141
if( !_modes[ ++_mode ] ) _mode = 0;
142
_modes[ _mode ]->activate();
139
149
// draw a display segment
140
void drawNextSegment( bool reset )
150
void draw_next_segment( bool reset )
142
152
// keep track of segment
143
153
#if CLOCK_FORWARD
148
158
if( reset ) segment = NUM_SEGMENTS - 1 - CLOCK_SHIFT;
161
// reset the text renderer's buffer
162
TextRenderer::reset_buffer();
166
_modes[ _mode ]->draw_reset();
168
// tell the text services we're starting a new frame
152
Drawer &drawer = major_modes[ major_mode ]->get_drawer();
153
if( reset ) drawer.draw_reset();
154
drawer.draw( segment );
173
_modes[ _mode ]->draw( segment );
175
// TODO: remove this hack
178
// draw text rednerer's buffer
179
TextRenderer::output_buffer();
156
181
#if CLOCK_FORWARD
157
182
if( ++segment >= NUM_SEGMENTS ) segment = 0;
164
189
// calculate time constants when a new pulse has occurred
165
void calculateSegmentTimes()
190
void calculate_segment_times()
167
192
// check for overflows, and only recalculate times if there isn't
168
193
// one (if there is, we'll just go with the last pulse's times)
169
if( new_pulse_at > last_pulse_at )
194
if( _new_pulse_at > _last_pulse_at )
171
196
// new segment stepping times
172
unsigned long delta = new_pulse_at - last_pulse_at;
173
segment_step = delta / NUM_SEGMENTS;
174
segment_step_sub = 0;
175
segment_step_sub_step = delta % NUM_SEGMENTS;
197
unsigned long delta = _new_pulse_at - _last_pulse_at;
198
_segment_step = delta / NUM_SEGMENTS;
199
_segment_step_sub = 0;
200
_segment_step_sub_step = delta % NUM_SEGMENTS;
178
203
// now we have dealt with this pulse, save the pulse time and
179
204
// clear new_pulse_at, ready for the next pulse
180
last_pulse_at = new_pulse_at;
205
_last_pulse_at = _new_pulse_at;
185
210
// wait until it is time to draw the next segment or a new pulse has
187
void waitTillNextSegment( bool reset )
212
void wait_till_end_of_segment( bool reset )
189
214
static unsigned long end_time = 0;
193
end_time = last_pulse_at;
218
end_time = _last_pulse_at;
195
220
// work out the time that this segment should be displayed until
196
end_time += segment_step;
197
segment_step_sub += segment_step_sub_step;
198
if( segment_step_sub >= NUM_SEGMENTS ) {
199
segment_step_sub -= NUM_SEGMENTS;
221
end_time += _segment_step;
222
_segment_step_sub += _segment_step_sub_step;
223
if( _segment_step_sub >= NUM_SEGMENTS ) {
224
_segment_step_sub -= NUM_SEGMENTS;
204
while( micros() < end_time && !new_pulse_at );
229
while( micros() < end_time && !_new_pulse_at );
208
// ISR to handle the pulses from the fan's tachiometer
209
void fanPulseHandler()
233
// ISR to handle the pulses from the fan's tachometer
234
void fan_pulse_handler()
211
236
// the fan actually sends two pulses per revolution. These pulses
212
237
// may not be exactly evenly distributed around the rotation, so
228
// set up an interrupt handler on pin 2 to nitice fan pulses
229
attachInterrupt( 0, fanPulseHandler, RISING );
253
// set up an interrupt handler on pin 2 to notice fan pulses
254
attachInterrupt( 0, fan_pulse_handler, RISING );
230
255
digitalWrite( 2, HIGH );
232
257
// set up output pins (4 to 13) for the led array
236
261
// set up mode-switch button on pin 3
237
262
pinMode( 3, INPUT );
238
263
digitalWrite( 3, HIGH );
239
button.add_event_at( 5, 1 );
240
button.add_event_at( 1000, 2 );
241
button.add_event_at( 4000, 3 );
244
Serial.begin( 9600 );
246
// set up major modes
247
static ModeSwitcher mode_switcher;
248
major_modes.push_back( &mode_switcher );
249
major_modes[ 0 ]->activate();
264
static int event_times[] = { 5, 500, 4000, 0 };
265
_button.set_event_times( event_times );
268
// Time::load_time();
270
// init text renderer
271
TextRenderer::init();
277
static SwitcherMajorMode switcher;
278
static SettingsMajorMode settings( _button );
282
_modes[ mode++ ] = &switcher;
283
_modes[ mode++ ] = &settings;
286
// activate the current major mode
287
_modes[ _mode ]->activate();
256
294
// if there has been a new pulse, we'll be resetting the display
257
bool reset = new_pulse_at? true : false;
295
bool reset = _new_pulse_at? true : false;
259
300
// only do this stuff at the start of a display cycle, to ensure
260
301
// that no state changes mid-display
304
// calculate segment times
305
calculate_segment_times();
266
307
// keep track of time
267
Time &time = Time::get_instance();
310
// perform button events
271
314
// draw this segment
272
drawNextSegment( reset );
274
// do we need to recalculate segment times?
276
calculateSegmentTimes();
315
draw_next_segment( reset );
278
317
// wait till it's time to draw the next segment
279
waitTillNextSegment( reset );
318
wait_till_end_of_segment( reset );
added
removed
src/propeller-clock.cc
