21
21
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
22
22
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
23
23
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
24
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
24
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
27
27
#_______________________________________________________________________________
30
# This is a general purpose makefile for use with Arduino hardware and
31
# software. It works with the arduino-1.0 software release. To download the
32
# latest version of this makefile, visit the following website, where you can
33
# also find more information and documentation on it's use. The following text
34
# can only really be considered a reference to it's use.
36
# http://ed.am/dev/make/arduino-mk
38
# This makefile can be used as a drop-in replacement for the Arduino IDE's
39
# build system. To use it, save arduino.mk somewhere (I keep mine at
40
# ~/src/arduino.mk) and create a symlink to it in your project directory named
41
# "Makefile". For example:
43
# $ ln -s ~/src/arduino.mk Makefile
45
# The Arduino software (version 1.0 or later) is required. If you are using
46
# Debian (or a derivative), type `apt-get install arduino`. Otherwise, you
47
# will have to download the Arduino software manually from http://arduino.cc/.
48
# It is suggested that you install it at ~/opt/arduino if you are unsure.
50
# If you downloaded the Arduino software manually and unpacked it somewhere
51
# other than ~/opt/arduino, you will need to set up ARDUINODIR to be the path
52
# where you unpacked it. (If unset, ARDUINODIR defaults to ~/opt/arduino and
53
# then /usr/share/arduino, in that order.) You might be best to set this in
54
# your ~/.profile by adding something like this:
56
# export ARDUINODIR=~/somewhere/arduino-1.0
58
# You will also need to set BOARD to the type of Arduino you're building for.
59
# Type `make boards` for a list of acceptable values. You could set a default
60
# in your ~/.profile if you want, but it is suggested that you specify this at
61
# build time, especially if you work with different types of Arduino. For
67
# You may also need to set SERIALDEV if it is not detected correctly.
69
# The presence of a .ino (or .pde) file causes the arduino.mk to automatically
70
# determine values for SOURCES, TARGET and LIBRARIES. Any .c, .cc and .cpp
71
# files in the project directory (or any "util" or "utility" subdirectories)
72
# are automatically included in the build and are scanned for Arduino libraries
73
# that have been #included. Note, there can only be one .ino (or .pde) file.
75
# Alternatively, if you want to manually specify build variables, create a
76
# Makefile that defines SOURCES and LIBRARIES and then includes arduino.mk.
77
# (There is no need to define TARGET). Here is an example Makefile:
79
# SOURCES := main.cc other.cc
81
# include ~/src/arduino.mk
83
# Here is a complete list of configuration parameters:
85
# ARDUINODIR The path where the Arduino software is installed on your system.
87
# ARDUINOCONST The Arduino software version, as an integer, used to define the
88
# ARDUINO version constant. This defaults to 100 if undefined.
90
# AVRDUDECONF The avrdude.conf to use. If undefined, this defaults to a guess
91
# based on where the avrdude in use is. If empty, no avrdude.conf
92
# is passed to avrdude (to the system default is used).
94
# AVRTOOLSPATH A space-separated list of directories to search in order when
95
# looking for the avr build tools. This defaults to the system PATH
96
# followed by subdirectories in ARDUINODIR if undefined.
98
# BOARD Specify a target board type. Run `make boards` to see available
101
# LIBRARIES A list of Arduino libraries to build and include. This is set
102
# automatically if a .ino (or .pde) is found.
104
# SERIALDEV The unix device name of the serial device that is the Arduino.
105
# If unspecified, an attempt is made to determine the name of a
106
# connected Arduino's serial device.
108
# SOURCES A list of all source files of whatever language. The language
109
# type is determined by the file extension. This is set
110
# automatically if a .ino (or .pde) is found.
112
# TARGET The name of the target file. This is set automatically if a
113
# .ino (or .pde) is found, but it is not necessary to set it
116
# This makefile also defines the following goals for use on the command line
119
# all This is the default if no goal is specified. It builds the
30
# This is a general purpose makefile for use with Arduino (arduino.cc)
31
# hardware and software. It works with the arduino-1.0 release and
32
# requires that to be downloaded separately.
34
# There are two ways to use this file, an automatic mode and a manual
35
# mode. In automatic mode, you simply copy this makefile to your
36
# arduino project directory, rename it "Makefile" and type make. The
37
# project directory is expected to contain an .ino or .pde file, which
38
# will automatically be used automatically, along with any other .c,
39
# .cc or .cpp files in the project directory and any subdirectory
40
# named "utility". In this way, this makefile should act as a drop-in
41
# replacement for the Arduino IDE's build process and can build a
42
# project automatically from the files in a project directory.
44
# Alternatively, you can manually specify what files should be
45
# inclided in a build. To use this makefile manually, you might be
46
# better to keep it somewhere and include it in your project's
47
# Makefile after having defined certain parameters that control the
48
# build. As an example, consider the following Makefile:
51
# SOURCES = main.cc foo.cc
53
# SERIALDEV = /dev/ttyACM0
54
# include ~/src/arduino.mk
56
# In both manual and automatic modes, the standard Arduino main.cpp's
57
# main() is included, which expects to be able to call init() and
58
# loop() in your code. The main difference is that, in manual mode,
59
# these would typically be placed in a .cc or .cpp file.
61
# When using manual mode, the following variables can be used:
63
# TARGET The name of the target file. This is typically the same name
64
# as the project directory for an arduino project and, if
65
# unspecified, that is used as a default.
67
# SOURCES A list of all source files of whatever language. The language
68
# type is determined by the file extension.
70
# BOARD Specify a target board type. These are defined in boards.txt,
71
# which came with your arduino installation. If unspecified,
72
# a default is used. (See below).
74
# SERIALDEV The unix device of the device where the arduino can be found.
75
# If unspecified, a default is used. (See below).
77
# This general-purpose makefile also defines the following goals for use on the
78
# command line when you run make:
80
# all This is the default if no goal is specified. It builds the
120
81
# target and uploads it.
122
# target Builds the target.
124
# upload Uploads the last built target to an attached Arduino.
126
# clean Deletes files created during the build.
128
# boards Display a list of available board names, so that you can set the
129
# BOARD environment variable appropriately.
131
# monitor Start `screen` on the serial device. This is meant to be an
132
# equivalent to the Arduino serial monitor.
83
# target Builds the target of your Makefile.
85
# upload Uploads the target to an attached arduino.
87
# clean Deletes temporary files.
134
89
# <file> Builds the specified file, either an object file or the target,
135
90
# from those that that would be built for the project.
136
#_______________________________________________________________________________
139
# default arduino software directory, check software exists
141
ARDUINODIR := $(firstword $(wildcard ~/opt/arduino /usr/share/arduino))
143
ifeq "$(wildcard $(ARDUINODIR)/hardware/arduino/boards.txt)" ""
144
$(error ARDUINODIR is not set correctly; arduino software not found)
147
# default arduino version
150
# default path for avr tools
152
AVRTOOLSPATH := $(subst :, , $(PATH))
153
AVRTOOLSPATH += $(ARDUINODIR)/hardware/tools
154
AVRTOOLSPATH += $(ARDUINODIR)/hardware/tools/avr/bin
92
#_______________________________________________________________________________
95
# The full path to the arduino software, from arduino.cc
96
ARDUINODIR := $(wildcard ~/opt/arduino-1.0)
98
# The board name to build for and upload to. For a complete list of available
99
# boards, see hardware/arduino/boards.txt in your arduino software directory.
100
# Here is a list of available boards at time of writing:
102
# atmega328 Arduino Duemilanove w/ ATmega328
103
# diecimila Arduino Diecimila or Duemilanove w/ ATmega168
104
# nano328 Arduino Nano w/ ATmega328
105
# nano Arduino Nano w/ ATmega168
106
# mega2560 Arduino Mega 2560 or Mega ADK
107
# mega Arduino Mega (ATmega1280)
108
# mini328 Arduino Mini w/ ATmega328
109
# mini Arduino Mini w/ ATmega168
111
# bt328 Arduino BT w/ ATmega328
112
# bt Arduino BT w/ ATmega168
113
# lilypad328 LilyPad Arduino w/ ATmega328
114
# lilypad LilyPad Arduino w/ ATmega168
115
# pro5v328 Arduino Pro or Pro Mini (5V, 16 MHz) w/ ATmega328
116
# pro5v Arduino Pro or Pro Mini (5V, 16 MHz) w/ ATmega168
117
# pro328 Arduino Pro or Pro Mini (3.3V, 8 MHz) w/ ATmega328
118
# pro Arduino Pro or Pro Mini (3.3V, 8 MHz) w/ ATmega168
119
# atmega168 Arduino NG or older w/ ATmega168
120
# atmega8 Arduino NG or older w/ ATmega8
125
# The name of the serial device that the arduino is at. For example,
126
# /dev/ttyACM0 (Uno), or /dev/ttyUSB0 (Duemilanove)
128
SERIALDEV := /dev/ttyACM0
131
#_______________________________________________________________________________
158
135
INOFILE := $(wildcard *.ino *.pde)
160
ifneq "$(words $(INOFILE))" "1"
161
$(error There is more than one .pde or .ino file in this directory!)
137
ifneq ($(words $(INOFILE)), 1)
138
$(error There is more than one .pde or .ino file in the directory!)
164
# automatically determine sources and targeet
165
140
TARGET := $(basename $(INOFILE))
166
141
SOURCES := $(INOFILE) \
167
$(wildcard *.c *.cc *.cpp) \
168
$(wildcard $(addprefix util/, *.c *.cc *.cpp)) \
169
$(wildcard $(addprefix utility/, *.c *.cc *.cpp))
171
# automatically determine included libraries
172
ARDUINOLIBSAVAIL := $(notdir $(wildcard $(ARDUINODIR)/libraries/*))
173
LIBRARIES := $(filter $(ARDUINOLIBSAVAIL), \
174
$(shell sed -ne "s/^ *\# *include *[<\"]\(.*\)\.h[>\"]/\1/p" $(SOURCES)))
178
# no serial device? make a poor attempt to detect an arduino
180
ifeq "$(SERIALDEV)" ""
181
SERIALDEV := $(firstword $(wildcard \
182
/dev/ttyACM? /dev/ttyUSB? /dev/tty.usbmodem*))
187
findsoftware = $(firstword $(wildcard $(addsuffix /$(1), $(AVRTOOLSPATH))))
188
CC := $(call findsoftware,avr-gcc)
189
CXX := $(call findsoftware,avr-g++)
190
LD := $(call findsoftware,avr-ld)
191
AR := $(call findsoftware,avr-ar)
192
OBJCOPY := $(call findsoftware,avr-objcopy)
193
AVRDUDE := $(call findsoftware,avrdude)
142
$(wildcard *.c *.cc *.cpp $(addprefix utility/, *.c *.cc *.cpp))
196
TARGET := $(if $(TARGET),$(TARGET),a.out)
197
146
OBJECTS := $(addsuffix .o, $(basename $(SOURCES)))
198
150
ARDUINOSRCDIR := $(ARDUINODIR)/hardware/arduino/cores/arduino
199
ARDUINOLIBSDIR := $(ARDUINODIR)/libraries
200
151
ARDUINOLIB := _arduino.a
201
ARDUINOLIBTMP := $(ARDUINOLIB).tmp
202
ARDUINOLIBOBJS := $(patsubst %, $(ARDUINOLIBTMP)/%.o, $(basename $(notdir \
203
$(wildcard $(addprefix $(ARDUINOSRCDIR)/, *.c *.cpp)))))
204
ARDUINOLIBOBJS += $(foreach lib, $(LIBRARIES), \
205
$(patsubst %, $(ARDUINOLIBTMP)/%.o, $(basename $(notdir \
206
$(wildcard $(addprefix $(ARDUINOLIBSDIR)/$(lib)/, *.c *.cpp)) \
207
$(wildcard $(addprefix $(ARDUINOLIBSDIR)/$(lib)/utility/, *.c *.cpp)) ))))
208
ifeq "$(AVRDUDECONF)" ""
209
ifeq "$(AVRDUDE)" "$(ARDUINODIR)/hardware/tools/avr/bin/avrdude"
210
AVRDUDECONF := $(ARDUINODIR)/hardware/tools/avr/etc/avrdude.conf
212
AVRDUDECONF := $(wildcard $(AVRDUDE).conf)
218
ifneq "$(MAKECMDGOALS)" "boards"
219
ifneq "$(MAKECMDGOALS)" "clean"
220
$(error BOARD is unset. Type 'make boards' to see possible values)
225
# obtain board parameters from the arduino boards.txt file
152
ARDUINOLIBTMP := _arduino.a.tmp
153
ARDUINOSOURCES := $(wildcard $(addprefix $(ARDUINOSRCDIR)/, *.c *.cpp))
154
ARDUINOOBJECTS := $(addsuffix .o, $(addprefix $(ARDUINOLIBTMP)/, $(basename \
155
$(subst $(ARDUINOSRCDIR)/,,$(ARDUINOSOURCES)))))
157
# obtain parameters from the arduino boards.txt file
226
158
BOARDS_FILE := $(ARDUINODIR)/hardware/arduino/boards.txt
227
159
BOARD_BUILD_MCU := \
228
160
$(shell sed -ne "s/$(BOARD).build.mcu=\(.*\)/\1/p" $(BOARDS_FILE))