/make/arduino-mk : revision 16

59

#

60

# You may also need to set SERIALDEV if it is not detected correctly.

61

#

62

# The presence of a .ino (or .pde) file causes the arduino.mk to automatically

62

# The presence of a .ino or .pde file causes the arduino.mk to automatically

63

# determine values for SOURCES, TARGET and LIBRARIES. Any .c, .cc and .cpp

64

# files in the project directory (or any "util" or "utility" subdirectories)

65

# are automatically included in the build and are scanned for Arduino libraries

66

# that have been #included. Note, there can only be one .ino (or .pde) file.

66

# that have been #included.

67

#

68

# Alternatively, if you want to manually specify build variables, create a

69

# Makefile that defines SOURCES and LIBRARIES and then includes arduino.mk.

78

# ARDUINODIR The path where you have installed/unpacked the arduino software

79

# (from http://arduino.cc/)

80

#

81

# ARDUINOCONST The arduino software version, as an integer, used to define the

82

# ARDUINO version constant. This defaults to 100 if undefined.

83

#

84

# AVRDUDECONF The avrdude.conf to use. If undefined, this defaults to a guess

85

# based on where the avrdude in use is. If empty, no avrdude.conf

86

# is passed to avrdude (to the system default is used).

87

#

88

# AVRTOOLSPATH A space-separated list of directories to search in order when

89

# lookin for the avr build tools. This defaults to the system PATH

90

# followed by subdirectories in ARDUINODIR if undefined.

91

#

92

81

# BOARD Specify a target board type. Run `make boards` to see available

93

82

# board types.

94

83

#

95

# LIBRARIES A list of arduino libraries to build and include. This is set

96

# automatically if a .ino (or .pde) is found.

97

#

98

84

# SERIALDEV The unix device name of the serial device that is the arduino.

99

85

# If unspecified, an attempt is made to determine the name of a

100

86

# connected arduino's serial device.

101

87

#

88

# TARGET The name of the target file. This is set automatically if a

89

# .ino or .pde is found, but it is not necessary to set it

90

# otherwise.

91

#

102

92

# SOURCES A list of all source files of whatever language. The language

103

93

# type is determined by the file extension. This is set

104

# automatically if a .ino (or .pde) is found.

94

# automatically if a .ino or .pde is found.

105

95

#

106

# TARGET The name of the target file. This is set automatically if a

107

# .ino (or .pde) is found, but it is not necessary to set it

108

# otherwise.

96

# LIBRARIES A list of arduino libraries to build and include. This is set

97

# automatically if a .ino or .pde is found.

109

98

#

110

99

# This makefile also defines the following goals for use on the command line

111

100

# when you run make:

130

119

#_______________________________________________________________________________

131

120

#

132

121

133

# default arduino software directory, check software exists

122

# The full path to the arduino software, from arduino.cc

134

123

ifndef ARDUINODIR

135

124

ARDUINODIR := $(wildcard ~/opt/arduino)

136

125

endif

137

ifeq "$(wildcard $(ARDUINODIR)/hardware/arduino/boards.txt)" ""

126

127

# check arduino software

128

ifeq ($(wildcard $(ARDUINODIR)/hardware/arduino/boards.txt), )

138

129

$(error ARDUINODIR is not set correctly; arduino software not found)

139

130

endif

140

131

141

# default arduino version

142

ARDUINOCONST ?= 100

143

144

# default path for avr tools

145

ifndef AVRTOOLSPATH

146

AVRTOOLSPATH := $(subst :, , $(PATH))

147

AVRTOOLSPATH += $(ARDUINODIR)/hardware/tools

148

AVRTOOLSPATH += $(ARDUINODIR)/hardware/tools/avr/bin

149

endif

150

151

132

# auto mode?

152

133

INOFILE := $(wildcard *.ino *.pde)

153

134

ifdef INOFILE

154

ifneq "$(words $(INOFILE))" "1"

135

ifneq ($(words $(INOFILE)), 1)

155

136

$(error There is more than one .pde or .ino file in this directory!)

156

137

endif

157

158

# automatically determine sources and targeet

159

138

TARGET := $(basename $(INOFILE))

160

139

SOURCES := $(INOFILE) \

161

140

$(wildcard *.c *.cc *.cpp) \

162

141

$(wildcard $(addprefix util/, *.c *.cc *.cpp)) \

163

142

$(wildcard $(addprefix utility/, *.c *.cc *.cpp))

164

165

143

# automatically determine included libraries

166

144

ARDUINOLIBSAVAIL := $(notdir $(wildcard $(ARDUINODIR)/libraries/*))

167

145

LIBRARIES := $(filter $(ARDUINOLIBSAVAIL), \

168

146

$(shell sed -ne "s/^ *\# *include *[<\"]$.*$\.h[>\"]/\1/p" $(SOURCES)))

169

170

endif

171

172

# no serial device? make a poor attempt to detect an arduino

173

SERIALDEVGUESS := 0

174

ifeq "$(SERIALDEV)" ""

175

SERIALDEV := $(firstword $(wildcard \

176

/dev/ttyACM? /dev/ttyUSB? /dev/tty.usbmodem*))

177

SERIALDEVGUESS := 1

178

endif

179

180

# software

181

findsoftware = $(firstword $(wildcard $(addsuffix /$(1), $(AVRTOOLSPATH))))

182

CC := $(call findsoftware,avr-gcc)

183

CXX := $(call findsoftware,avr-g++)

184

LD := $(call findsoftware,avr-ld)

185

AR := $(call findsoftware,avr-ar)

186

OBJCOPY := $(call findsoftware,avr-objcopy)

187

AVRDUDE := $(call findsoftware,avrdude)

147

endif

148

149

# no target? use default

150

ifeq ($(TARGET), )

151

TARGET := a.out

152

endif

153

154

# no serial device? attempt to detect an arduino

155

ifeq ($(SERIALDEV), )

156

SERIALDEV := $(firstword $(wildcard /dev/ttyACM? /dev/ttyUSB?))

157

endif

158

159

# no board? oh dear...

160

ifndef BOARD

161

ifneq "$(MAKECMDGOALS)" "boards"

162

ifneq "$(MAKECMDGOALS)" "clean"

163

$(error BOARD is unset. Type 'make boards' to see possible values)

164

endif

165

endif

166

endif

188

167

189

168

# files

190

TARGET := $(if $(TARGET),$(TARGET),a.out)

191

169

OBJECTS := $(addsuffix .o, $(basename $(SOURCES)))

192

170

ARDUINOSRCDIR := $(ARDUINODIR)/hardware/arduino/cores/arduino

193

171

ARDUINOLIBSDIR := $(ARDUINODIR)/libraries

199

177

$(patsubst %, $(ARDUINOLIBTMP)/%.o, $(basename $(notdir \

200

178

$(wildcard $(addprefix $(ARDUINOLIBSDIR)/$(lib)/, *.c *.cpp)) \

201

179

$(wildcard $(addprefix $(ARDUINOLIBSDIR)/$(lib)/utility/, *.c *.cpp)) ))))

202

ifeq "$(AVRDUDECONF)" ""

203

ifeq "$(AVRDUDE)" "$(ARDUINODIR)/hardware/tools/avr/bin/avrdude"

204

AVRDUDECONF := $(ARDUINODIR)/hardware/tools/avr/etc/avrdude.conf

205

else

206

AVRDUDECONF := $(wildcard $(AVRDUDE).conf)

207

endif

208

endif

209

210

# no board?

211

ifndef BOARD

212

ifneq "$(MAKECMDGOALS)" "boards"

213

ifneq "$(MAKECMDGOALS)" "clean"

214

$(error BOARD is unset. Type 'make boards' to see possible values)

215

endif

216

endif

217

endif

218

180

219

181

# obtain board parameters from the arduino boards.txt file

220

182

BOARDS_FILE := $(ARDUINODIR)/hardware/arduino/boards.txt

229

191

BOARD_UPLOAD_PROTOCOL := \

230

192

$(shell sed -ne "s/$(BOARD).upload.protocol=$.*$/\1/p" $(BOARDS_FILE))

231

193

232

# invalid board?

233

ifeq "$(BOARD_BUILD_MCU)" ""

234

ifneq "$(MAKECMDGOALS)" "boards"

235

ifneq "$(MAKECMDGOALS)" "clean"

236

$(error BOARD is invalid. Type 'make boards' to see possible values)

237

endif

238

endif

239

endif

194

# software (prioritise binaries that came with arduino software)

195

FIND_SOFTWARE = $(firstword $(wildcard \

196

$(ARDUINODIR)/hardware/tools/$(1) \

197

$(ARDUINODIR)/hardware/tools/avr/bin/$(1) \

198

) $(1) )

199

CC := $(call FIND_SOFTWARE,avr-gcc)

200

CXX := $(call FIND_SOFTWARE,avr-g++)

201

LD := $(call FIND_SOFTWARE,avr-ld)

202

AR := $(call FIND_SOFTWARE,avr-ar)

203

OBJCOPY := $(call FIND_SOFTWARE,avr-objcopy)

204

AVRDUDE := $(call FIND_SOFTWARE,avrdude)

240

205

241

206

# flags

242

CPPFLAGS := -Os -Wall -fno-exceptions -ffunction-sections -fdata-sections

243

CPPFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums

244

CPPFLAGS += -mmcu=$(BOARD_BUILD_MCU)

245

CPPFLAGS += -DF_CPU=$(BOARD_BUILD_FCPU) -DARDUINO=$(ARDUINOCONST)

207

CPPFLAGS = -Os -Wall -fno-exceptions -ffunction-sections -fdata-sections

208

CPPFLAGS += -mmcu=$(BOARD_BUILD_MCU) -DF_CPU=$(BOARD_BUILD_FCPU)

246

209

CPPFLAGS += -I. -Iutil -Iutility -I$(ARDUINOSRCDIR)

247

210

CPPFLAGS += -I$(ARDUINODIR)/hardware/arduino/variants/$(BOARD_BUILD_VARIANT)/

248

211

CPPFLAGS += $(addprefix -I$(ARDUINODIR)/libraries/, $(LIBRARIES))

249

212

CPPFLAGS += $(patsubst %, -I$(ARDUINODIR)/libraries/%/utility, $(LIBRARIES))

250

AVRDUDEFLAGS := $(addprefix -C , $(AVRDUDECONF)) -DV

213

AVRDUDEFLAGS = -C $(ARDUINODIR)/hardware/tools/avrdude.conf -DV

251

214

AVRDUDEFLAGS += -p $(BOARD_BUILD_MCU) -P $(SERIALDEV)

252

215

AVRDUDEFLAGS += -c $(BOARD_UPLOAD_PROTOCOL) -b $(BOARD_UPLOAD_SPEED)

253

LINKFLAGS := -Os -Wl,--gc-sections -mmcu=$(BOARD_BUILD_MCU)

254

255

# figure out which arg to use with stty

256

STTYFARG := $(shell stty --help > /dev/null 2>&1 && echo -F || echo -f)

216

LINKFLAGS = -Os -Wl,--gc-sections -mmcu=$(BOARD_BUILD_MCU)

257

217

258

218

# default rule

259

219

.DEFAULT_GOAL := all

272

232

@test -n "$(SERIALDEV)" || { \

273

233

echo "error: SERIALDEV could not be determined automatically." >&2; \

274

234

exit 1; }

275

@test 1 -eq $(SERIALDEVGUESS) && { \

276

echo "*GUESSING* at serial device:" $(SERIALDEV); \

277

echo; }

278

stty $(STTYFARG) $(SERIALDEV) hupcl

235

stty -F $(SERIALDEV) hupcl

279

236

$(AVRDUDE) $(AVRDUDEFLAGS) -U flash:w:$(TARGET).hex:i

280

237

281

238

clean:

295

252

@test -n `which screen` || { \

296

253

echo "error: can't find GNU screen, you might need to install it." >&2 \

297

254

ecit 1; }

298

@test 1 -eq $(SERIALDEVGUESS) && { \

299

echo "*GUESSING* at serial device:" $(SERIALDEV); \

300

echo; }

301

255

screen $(SERIALDEV)

302

256

303

257

# building the target